Shark Anything higher than a 3s will fry the ESC
2023-02-12 04:09:51 Hữu ích (0)
Shark@BG393542221 Hi, it's a modified FTX BANZAI drift car. Main chassis had to be cut to fit the bigger motor, pinion and spur gears both replaced, this also meant there was no more room for the ESC to fit in the original location, so I had to mount it where the original battery went. In order to fit x 2 batteries I used another main chassis and cut the front and back off it to hold the batteries on top.
Shark Unless the design has now changed, I believe the answer given by the seller is incorrect. The motor shipped with my order has 5mm shaft, as you say 1-8 scale motors usually have this size and you're right, it's 5mm.
2022-11-12 01:37:46 Hữu ích (1)Q: on a 2s lipo battery, do you recommend a 50c or a 80c ?
Được hỏi bởi Neko2787 trên 2022-11-12 07:28:46
Shark Started with 35c (constant) - 65c (burst) 2s overlander battery. Now running 120c 2s Zeee power premium battery without any issues. Noticeable improvement on the 120c.
2022-11-12 11:36:41 Hữu ích (1)Q: Will this system hook up to a spektrum DX5C transmitter?
Được hỏi bởi BG104512912 trên 2021-01-18 10:08:41
Shark Works fine with the Spektrum STX3.
2022-05-18 01:36:44 Hữu ích (0)Q: did i need programation card ?
Được hỏi bởi pierrelouison trên 2020-10-14 05:53:26
Shark No, the ESC default settings are as follows - Low voltage cut-off: 3.1V Acceleration mode (punch): medium Max brake force (25A, 45A, 60A ESC's): 50% Max reverse force: 25% Neutral range: narrow 9% All quite sensible settings, with no real need to adjust.
2022-05-15 02:53:10 Hữu ích (0)
Shark The default value is 3.1V. Adjustable to 2.9V, 2.7V or 0V if you purchase the additional programme card.
2022-05-15 02:44:05 Hữu ích (0)Chúng tôi chân thành mời bạn đăng ký email Mời Trả lời!
Nếu bạn đăng ký, chúng tôi sẽ mời bạn qua email để trả lời các câu hỏi của mọi người về sản phẩm. Bằng cách đăng ký, bạn cũng sẽ nhận được "Huy hiệu hữu ích "! Bạn có thể hủy đăng ký bất kỳ lúc nào trên trang cài đặt quyền riêng tư.
Giúp đỡ người khác và hạnh phúc hơn!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
