Robert
Q: How mant watt hours? Feels like that's most important!
Asked by Robert on 2021-09-03 08:13:40
The seller 88.8Wh
2021-09-05 09:07:33 Helpful (0)
qinpeng TPU can suitable
2020-12-04 04:03:44 Helpful (0)
Q: Will these fit the new Skyzone Sky 02C and Sky 02X ?
Asked by Robert on 2019-06-16 03:31:02
Pyroballogy Thanks for your feedback, have put it on product page.
2020-12-05 01:38:09 Helpful (0)Q: Is there any optional canopy for a Caddx vista installation?
Asked by Robert on 2020-11-22 05:31:53
vexeta yes, Simply by raising the upper part of the chassis a little with some hard rubbers under the posts, you can mount the caddx without problem, you could also remove the top lights of the r369 and you will already fit the caddx. Diatone also has tpu options for the 369 on its page. Do not hesitate, it is the best quad I have flown, it is worth the investment.
2020-11-22 07:27:23 Helpful (0)Q: can I install crossfire on it?
Asked by andrewvhs on 2019-08-16 07:19:02
Robert You need to install the EMC shield with a ground wire connected to the battery minus,Place the shielding plate above the VTX otherwise you will get very noisy video feed, That's my experience! You won't see the OSD text at all and it is not flyable as you get white and black striped rolling horizontally! After the shield is applied there is no noise in the video! Video feed is crisp until you power on the radio.The only place i found the Crossfire receiver will fit is above the VTX so proper shielding is a must i think but that's not a big issue!
2020-11-22 05:43:10 Helpful (0)
Robert I have installed Crossfire. You need to install the EMC shield with a ground wire connected to the battery minus,Place the shielding plate it above the VTX otherwise you will get very noisy video feed! You won't see the OSD text at all is my experience! After the shield is applied there is no noise in the video!
2020-11-22 05:37:21 Helpful (0)Q: Anyone else who has Roll of death with the Tekko32 ESCs above?
Asked by Robert on 2020-10-10 03:53:44
cobonovi It'sa problem with the esc (known issue). Contact holybroo for replacement.
2020-10-14 07:35:34 Helpful (0)
Q: Does these fit Sky02? I have the non S version
Asked by Robert on 2019-03-15 05:48:49
ilboss yes!
2020-09-30 03:04:21 Helpful (0)Q: Where can i find bearings for this motor? They seems to be very fragile!
Asked by Robert on 2020-04-30 11:51:56
Pusshdad123 T-motor office web?
2020-05-11 04:27:49 Helpful (0)Q: Can you run these motors with 4S?
Asked by Robert on 2019-05-01 04:31:25
Enrico Ja it's made for use with 4s.
2019-09-28 02:24:32 Helpful (0)
darkdiver FOVis almost the same for both lenses, but the distortion is lower for the 1.66mm lens. There is a comparison video in YouTube.
2019-06-12 11:43:02 Helpful (2)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
