Kayl Hosken
Q: how to change to pal from NST
zapytał Kayl Hosken na 2018-07-13 11:55:33
JackDee3 I think you can change that setting in the OSD or with editing software.
2021-11-06 04:57:59 Pomocny (0)Q: how do i power the Flight controller, can it be powered by the Vbat terminal connection
zapytał Kayl Hosken na 2018-05-04 06:19:28
Martin Kottek Yes, Check out a Wiring Diagram for this FC to locate the pins for Vbat.
2021-11-03 07:26:11 Pomocny (0)Q: does this ESC provide 4x 15A out put or is it a total of 15A so 4x3.75A?
zapytał Kayl Hosken na 2019-06-08 06:56:31
supriyakhamitkar yes ti provides 4×15A output
2021-02-25 10:19:25 Pomocny (1)Q: i need the wiring diagram what each colour wire is please
zapytał Kayl Hosken na 2019-03-08 05:21:18
kreidler50 LtR if cable plugged in: black-GND, red-VBat, white-M4, yellow-M3, green-M2, gray-M1
2021-01-16 03:50:36 Pomocny (0)
BG535533421 Mostif not all Flight Controllers have their own 5v regulators onboard, converting VBATT into 5v for the FC to run on. Either a linear regulator or an actual 5v BEC. Check the spec of your particular FC.
2020-10-13 06:31:53 Pomocny (0)Q: Can I use with original FC of lizard95? Because I think this don't have bec.
zapytał Felipe na 2020-01-11 08:38:19
Kayl Hosken I did this as you said you can and by doing so i blew up my Frsky reciever and VTX..... Connecting this ESC directly to the original FC of lizard95 puts battery voltage to all your 5v pads on the original FC of lizard95. Also other flight controllers the cable harness connects to FC and they are expecting 5v. so check if your FC does take 2-4s battery voltage. Need solder power wires to the correct locations and use a 5v bec with the original FC of lizard95. I found out the hard way
2020-03-01 02:32:45 Pomocny (0)
Kayl Hosken SOit fits the Foxeer HS1177? Im guessing extra 1 in there typo
Q: what size are the screws that go into the camera?
zapytał Kayl Hosken na 2018-07-07 02:48:44
ethss m2 screw
2018-08-04 12:57:10 Pomocny (0)
Coburglis02 It is automatically switched according to your camera.
2018-08-02 06:42:52 Pomocny (0)
Lactoscope It doesn't have 5V BEC Output. It is a flight controller board and you want to connect it to another FC? That sounds amazing.
2018-06-04 03:05:23 Pomocny (0)
Serdecznie zapraszamy do zasubskrybowania e-maila z zaproszeniem!
Jeśli się zapiszesz, zaprosimy Cię e-mailem, aby odpowiedzieć na pytania ludzi dotyczące produktów. Subskrybując Ciebie], zdobędziesz także "Pomocną odznakę "! Możesz zrezygnować z subskrypcji w dowolnym momencie na stronie ustawień prywatności.
Pomóż innym i bądź szczęśliwszy!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
