odpowiedzi

Kayl Hosken I did this as you said you can and by doing so i blew up my Frsky reciever and VTX..... Connecting this ESC directly to the original FC of lizard95 puts battery voltage to all your 5v pads on the original FC of lizard95. Also other flight controllers the cable harness connects to FC and they are expecting 5v. so check if your FC does take 2-4s battery voltage. Need solder power wires to the correct locations and use a 5v bec with the original FC of lizard95. I found out the hard way

Pomocny (0)
Zatwierdź
odpowiedzi (2)