Will
Will Youare correct. Nice hull, very poor transmitter/receiver. Replaced mine with a FlySky airplane transmitter.receiver. Now operates very smooth.
Q: what is the difference of this battery to a 7.4V 600mAh ?
Asked by BG162055171 on 2023-03-22 10:24:27
Will For brushless motors Voltage determines RPM. mAh determines flight time. The question to ask in this case is "What are the dimensions of the battery pack?" It may not fit in your model. Be prepared to solder different connectors on the wires. Another issue is the shape of the two cells inside. They may be flat or they may be tubular, like AA batteries. ie., will it fit?
2023-03-23 10:43:27 Helpful (0)
Will I have been unable to get it into Level mode. It seems to only work in 3D or stabilize mode. I prefer level mode for soaring gliders.
Will Itauto binds at power up. However, use a $55 FlySky transmitter- receiver for a smoother feel on the controls. Also may be used in other RC models without recalibration every time it is used.
2023-02-26 09:54:40 Helpful (0)
Will Ido not know the answer. Compare battery length and width to space in a wpl (what ever that is).
2023-02-26 09:47:47 Helpful (0)
Q: will it work with a spektrum dx6i transmitter?
Asked by BG454215418 on 2023-02-03 09:19:46
Will It should. For DSMX-DSM2 protocol turn the yellow knob on the IrangeX to 7 (not 8). The missing arrow on the knob is where the screwdriver slot intersects the flat spot on the yellow knob. Bind as usual. That is: power on the receiver first. Then while pressing the black button (next to the yellow button) on the IrangeX, power on the transmitter. It should bind in a few seconds.
2023-02-03 10:15:03 Helpful (1)Q: Are there spare parts ??? Other sails ??
Asked by Christien on 2019-11-09 02:23:37
Will The glue holding the plastic reinforcements at the sail corners softens at 105F. Be prepared to re-glue the corner reinforcements. The on-off switch becomes intermittent after about 50 cycles. Replacement switches of the same dimensions will work better. Single pole - single throw works. You do not need to switch both the power wires, just one will open or close the circuit. Use silicon cement on the keel to hull joint. The gasket will distort when the main bolt is tightened. Fabricate a spare drain plug because the one provided will get lost. Store the boat with the hatch removed so the interior will dry out. Use white plastic electrical tape to cover the hatch seams. The provided hatch gasket is easy damaged so tape is needed to keep water out.
2021-12-19 04:45:11 Helpful (1)
Q: why thy arrive black and red instead of multiple color like in sales picture
Asked by ingdump on 2021-04-24 12:07:51
Will Black is always the negative lead. The others are positive relative to the black lead.
2021-04-24 02:45:25 Helpful (1)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
Will I have never seen a Lipo battery identified as Lipo by 18650. That number is probably a lot number. Sorry I do not have a better answer.
2023-09-04 09:09:37 Helpful (0)