A part of the review has been auto-translated.
I purchased this screen for use with an Arduino Mega. Using the UTFT library, I have been able to access all the features of this screen - LCD, Touch and SD card access. It is excellent value, has good colour rendition and works reliably. UTFT Setup is: UTFT myGLCD(SSD1289,38,39,40,41); UTouch myTouch(6,5,4,3,2); const int chipSelect = 53; pinMode(53, OUTPUT); Connections are: LCD Pin - Function - Arduino Pin 1 - Gnd -Ground 2 - VCC - 5V 3 - NC - No Connection 4 - RS - D38 5 - WR - D39 6 - RD - 3.3V 7 to 14 - DB8 to DB15 - D22 to D29 15 - CS - D40 16 - F_CS - No Connection 17 - REST - D41 18 - NC - No Connection 19 - LED_A - 5V 20 - NC - No Connection 21 to 28 - DB0 to DB7 - D37 to D30 29 - T_CLK - D6 30 - T_CS - D5 31 - T_DIN - D4 32 - NC - No Connection 33 - T_DO - D3 34 - T_ITQ - D2 35 - SD_DO - D50 (MISO) 36 - SD_CLK - D52 37 - SD_DIN - D51 (MOSI) 38 - SD_CS - D53 39 - NC - No Connection 40 - NC - No Connection
After some research, the screen works with UTFT and URTouch library but only if you write this : UTFT myGLCD(ILI9341_16,38,39,40,41); So the name of the controller is not SSD1289, but ILI9341_16... Anyway, the screen works and this is the most important... I hope my comment will be usefull !