I tested the flight controller with a DSMX receiver but it don't work. I also try with a frsky receiver (ibus and ppm) and it don't work too. I used UART1 and UART2 ports but they both don't work. I made a video : https://youtu.be/qbzpWaPqbYY

I tested the flight controller with a DSMX receiver but it don't work. I also try with a frsky receiver (ibus and ppm) and it don't work too. I used UART1 and UART2 ports but they both don't work. I made a video : https://youtu.be/qbzpWaPqbYY

I tested the flight controller with a DSMX receiver but it don't work. I also try with a frsky receiver (ibus and ppm) and it don't work too. I used UART1 and UART2 ports but they both don't work. I made a video : https://youtu.be/qbzpWaPqbYY

Good FC, real 15A, tiny size and good slots for soldering.

Good FC, real 15A, tiny size and good slots for soldering.

Good FC, real 15A, tiny size and good slots for soldering.

After 70 days finaly arrived to Slovenia. One of the cheapest FC F4 AIO 12A board. Worked for my LDARC ET75mm frame, MAMBA 08028 12KV motors on 2S, HAPPYMODEL DIAMOND VTX and Caddx Kangaroo 1000TVL 2.1mm

After 70 days finaly arrived to Slovenia. One of the cheapest FC F4 AIO 12A board. Worked for my LDARC ET75mm frame, MAMBA 08028 12KV motors on 2S, HAPPYMODEL DIAMOND VTX and Caddx Kangaroo 1000TVL 2.1mm

After 70 days finaly arrived to Slovenia. One of the cheapest FC F4 AIO 12A board. Worked for my LDARC ET75mm frame, MAMBA 08028 12KV motors on 2S, HAPPYMODEL DIAMOND VTX and Caddx Kangaroo 1000TVL 2.1mm

almost identical with crazybee board. Very good quality. work great

almost identical with crazybee board. Very good quality. work great

almost identical with crazybee board. Very good quality. work great

I am surprised! At the price I was very sceptical (28€) and therefore he lay around for a while. I have the FC now in a 4 inch ultralight (103g without battery, with under 200g). HQ T-mount Props and BetaFPV 1404 motors. The part goes off neatly. There makes a 12A board already limp. The only drawback is that I have RPM-Filter so Bidirectional D-Shot not yet to run. ESCs are on version 16.8 RC3 96k (JazzMaverick). It worked on the Geprc 20A board. Otherwise the board is really great. That's all I need.

Ich bin überrascht! Bei dem Preis war ich sehr skeptisch (28€) und deswegen lag er auch ne Weile rum. Ich hab den FC jetzt in einem 4 Inch Ultralight (103g ohne Akku, mit unter 200g). HQ T-mount Props und BetaFPV 1404 Motoren. Das Teil geht ordentlich ab. Da macht ein 12A Board schonmal schlapp. Einziges Manko ist, dass ich RPM-Filter also Bidirectional D-Shot noch nicht zum Laufen bekommen habe. ESCs sind auf Version 16.8 RC3 96k (JazzMaverick). Beim Geprc 20A Board hats geklappt. Ansonsten ist das Board echt super. Mehr brauch ich nicht.

I am surprised! At the price I was very sceptical (28€) and therefore he lay around for a while. I have the FC now in a 4 inch ultralight (103g without battery, with under 200g). HQ T-mount Props and BetaFPV 1404 motors. The part goes off neatly. There makes a 12A board already limp. The only drawback is that I have RPM-Filter so Bidirectional D-Shot not yet to run. ESCs are on version 16.8 RC3 96k (JazzMaverick). It worked on the Geprc 20A board. Otherwise the board is really great. That's all I need.

GOOD PRODUCTOR

GOOD PRODUCTOR

GOOD PRODUCTOR

Looks great!

Looks great!

Looks great!