Scocca originale Hiland Supporting per modulo Transistor Tester versione M12864 Graphics DIY. Custodia

Recensioni correlate

• Con Cyberbest 05/04/2016 This case is nice but it don’t seem to be manufactured for this component tester. It has many drawbacks. But with a little work is can work great. The first thing I noticed was there wasn’t any output for the function generator. Then the counter needed to have some strange arrangements of pin2 and 3 of the connector. Not to mention the connector is very low quality and won’t last very long with use. The two holes for the banana plugs is much larger than the plugs provided and so makes it
• Con mitasat 03/10/2017 la cover si adatta perfettamente al circuito, ma bisognerebbe apportare delle modifiche alla scocca, come ho fatto. 1) inserire un terzo polo centrale per poter collegare anche il pin 2 2) inserire nel kit una femmina jack 3.5mm per poter collegare l' ingresso "F in" 3) inserire nel kit una clip per pila 9v