Description:
Item Name: Multifunctional Sound And Lighting Controller
Weight: 5g (not included wire)
Size: 34*25*12 mm
Input voltage: 5~15V / 2s~4s
Output voltage: 5~15V
Note 1: The output voltage and external input voltage is the same, when the input is 7V when, LED1~LED4 enable the use of the output is 7V. When the input is 12V, the output is also 12V.
Such as the need for an external supply power, you can take 5V from the receiver to connected 5V and GND to the interface.
Note 2: Be sure to distinguish between positive and negative voltage, reverse polarity or a short circuit may lead to burnout, and is
not covered under warranty.
Features:
Lighting control
Flying Light: Always lighting flight indicator, It can be used to fly decorative lights, front headlight searchlight.
Cornering lamp: the receiver "aileron / direction" channel linkage, for left and right turn indicator.
Brake light: With receiver "lift / throttle" channel linkage, for brakes, reverse directions.
Note: Players can use Strobe, color lights, etc. used in different occasions.
Low pressure alarm
When detecting the voltage drops below a preset value (7 ~ 15V adjustable), all the LEDs flash with an alarm sound B~B~. Avoiding over discharge caused damage.
Uncontrolled alarm, look for the aircraft alarm
When the control panel within 30 seconds input signal is detected unchanged, namely to start sound and light alarms. This function can be used after the crash Uncontrolled alarm or fall easy search by voice, lighting model. Dual high power buzzer alarm can still be heard in a hundred meters outside.
More features developed by you
Dashboard works: When detected PWM1 input channel below the neutral point, LED-3 channel output voltage of 12V, higher than the neutral point, LED-4 output voltage of 12V. Similarly, when the PWM2 input is below the neutral point, LED-2 output voltage of 12V.
Dashboard logic is fixed, but the way of application can be changed. You can completely achieve more fun features through alternative methods.
For example: Access Strobe in LED-2, and can be dialed by remote control gear switch control lights on and off.
You can see the Video about the product.
https://www.youtube.com/watch?v=igTdYWsqo8s&feature=youtu.be
Package Included:
No led light: