tin nhắn

Macieira Dude,as far brushed ESCs go, this is a must. I have 3 of these. They are reliable, durable and powerful. I run a formula, a pan car and a 1/10 buggy with it. They are cheap to assemble some RTR cars for kids. Just put it together with one of those surpass brushed motors they have here and bring life to that old kit you might have gathering dust somewhere at your garage. It also has lipo cut off. You cant ask more than that.

JarekA 23/05/2019
1
Bình luận (1)

Q: can this ESC run dual 370 brushed motors?

Được hỏi bởi jpdconcepts trên 2019-01-16 08:28:41

Macieira It depends on the current drain of the motor. It's made to fit fine with 540 motors but it may work well with small-sized motors.

2019-07-29 07:29:45 Hữu ích (0)
Gửi đi
Đáp án (3)

Q: Does it have a neutral brake adjustment function?

Được hỏi bởi ww2maniax trên 2019-05-17 07:31:46

Macieira Not that I felt. You may set it on your transmitter tho.

2019-07-29 07:22:41 Hữu ích (1)
Gửi đi
Đáp án (2)

Q: can i Connect hobbywing card programming with this esce

Được hỏi bởi pablo trên 2017-11-24 02:13:39

Macieira It does not need a programming card. You only set 2 things on this esc: 1. if it uses lipo (wich turns on the lipo 2S cut off to 7.4v) or NIMH batteries; 2. if it goes Foward+brake+reverse/Foward+brake/Foward+reverse.

2019-07-29 07:19:59 Hữu ích (0)
Gửi đi
Đáp án (1)

Q: What is the low voltage cutoff for a 2S LiPo or Li-ion battery set at on this ESC?

Được hỏi bởi etoyoc trên 2018-06-26 12:37:47

Macieira I have 3 of these and, by personal experience, I can report the cutoff (when the esc is properly set for LIPO batteries) hits in when lipo 2S gets as low as 7.4v. I have seen people say it does not have a cutoff because they are used to brushless escs cutting off with 3.4v per cell or because this esc cuts off long after the low voltage alarm would start to buzz. As a way of precaution, I would install a low voltage buzzer.

2019-07-29 07:08:33 Hữu ích (2)
Gửi đi
Đáp án (2)