Greg Partlow
bình luận của tôi
tin nhắn
Nhận xét
Bình luận
Đáp án
Câu hỏi

tin nhắn

Greg Partlow 12/10/2018
I have this rigged up to a thrown together cnc machine with 4 steppers and 4 tb6600 stepper drivers hooked up to an arduino mega running with grbl and now with this 5W laser engraving module. I wish there were instructions or google searches with people who did this more but there are not. so here's some tips. I found if I put the dangly cable where the power is coming in from connected to the ground on the arduino and the + on the ttl/pwn thing on the right part it works, after doing the $32 enable laser mode on the grbl settings. then throw in some g-code generated from inkspace with some laser plugin (which puts the m3 and m5 gcode to turn on and off the laser module) in to g-code sender platform, it works very well. I engraved a bunch of phallic objects that I can't really add as another picture here due to it being inappropriate and just juvenile but, what other test subject matter is there than a few huge richards to laugh at. the after adjusting the focus a little it makes a very small ~0.5mm burn dot. I tried it on some wood planks I had laying around which made my garage smell wonderful from the burning wood.
Mô-đun khắc laser 450nm 5W ánh sáng màu xanh lá cây với điều chế TTL
US$109.99 US$199.90
13
gợi ý
Bình luận (1)
Greg Partlow 06/01/2020
works well. I don't understand why the colors are the way they are. I would have thought blue would be cold then green would be good and red would be hot but apparently green is cold and blue is the good temp. other than that it takes a second to install and works well.
Đầu vòi sen vuông 6 Inch điều chỉnh 360°, đèn LED bằng thép không gỉ, thay đổi màu sắc 3 mức nhiệt độ, điều khiển phòng tắm
US$23.99 US$28.99
0
gợi ý
Bình luận (0)

Greg Partlow doingwhat with aluminum, just engravings or cutting?

robhampson 20/08/2018
good quality, perfect for alluminium
6 cái R0.5-3mm HRC45 2 Flutes Ball Mũi End Mill Máy phay phay phủ nitơ Bộ công cụ CNC
US$16.19 US$17.65
0
Bình luận (1)
Máy đo đường huyết Máy đo đường tiểu đường Máy đo đường huyết Hệ thống chăm sóc sức khỏe Đen
US$27.99 US$28.99

Q: my question is 11111, if the wrench also can blood monitor? 11111?

Được hỏi bởi Whamsplat trên 2019-03-12 10:33:36

Greg Partlow I can't imagine that this is a real question. perhaps you are training today?

2019-03-12 04:15:31 Hữu ích (1)
Gửi đi
Đáp án (1)
11 Bộ chuyển đổi Bộ chuyển đổi Bộ điều hợp 7777
US$111.00

Q: what is this?

Được hỏi bởi Greg Partlow trên 2019-03-12 04:14:23

VijayColaco god knows..

2019-03-14 04:44:18 Hữu ích (0)
Gửi đi
Đáp án (1)
Greg Partlow 02/01/2019
the digital display is nice
Mô-đun nguồn điện giảm áp có thể điều chỉnh LM2596 DC-DC có hiển thị
US$1.99 US$9.99
0
gợi ý
Bình luận (0)
Greg Partlow 02/01/2019
this spits out lots of data very fast
Cảm biến trường từ la bàn tự động tổ hợp 9 trục 9DOF MPU9250 tích hợp 9DOF 9-Axis thính giác gia tốc kế con quay
US$7.55 US$9.06
0
gợi ý
Bình luận (0)
Greg Partlow 02/01/2019
not sure what i'm going to use this for yet but it works on the i2c interface
Bộ chuyển đổi tần số nhịp tim MAX30102 Mô-đun cảm biến nhịp tim Phát hiện Xét nghiệm nồng độ oxy trong máu
US$3.49 US$11.99
0
gợi ý
Bình luận (0)
Greg Partlow 24/11/2018
I thought I was going to be in a world of hurt putting this together attempting to translate the translated instructions, but a key highlight with these instructions was little notes telling you what not to do and how to put things correctly to not mess them up. e.g. 'make sure the long side of the capacitor goes in this hole' the resistor either my multi-meter is terrible or the components values are slightly off, either or, there was some minor dependencies in the values the components stated they were. it fired right up though once all soldered in, though I need to watch a video on how to actually use it because just pushing buttons like the guys in videos doesn't work as easily as one would have thought.
Bộ gắp gọn DSO-SHELL DSO150 15001K Máy hiển thị dao động Kỹ thuật số DIY gốc từ JYETech Chưa lắp ráp kèm vỏ
US$28.99 US$45.99
0
gợi ý
Bình luận (0)
Greg Partlow 01/11/2018
I tested this connected to an 18v lithium ion battery block with good results. it heated up a screw within 10 seconds. this video shows a demonstration of the unit. https://youtu.be/zk7RPzUCk_E
Máy Hàn Truyền Dẫn ZVS 1000W 20A máy làm mát quạt PCB ống đồng 12-36V của Geekcreit®
US$43.99 US$51.99
1
gợi ý
Bình luận (0)
Mô-đun khắc laser 450nm 5W ánh sáng màu xanh lá cây với điều chế TTL
US$109.99 US$199.90

Q: Is this laser a circular or square/rectangle beam? Thanks.

Được hỏi bởi baxtred trên 2018-06-19 04:46:50

Greg Partlow it's not square or completely circular. I'd say it's a cross between a square and rectangle. more of an oval type shape just under 1mm I'd say

2018-10-25 03:36:11 Hữu ích (0)
Gửi đi
Đáp án (1)
Mô-đun khắc laser 450nm 5W ánh sáng màu xanh lá cây với điều chế TTL
US$109.99 US$199.90

Q: Is the focus point adjustable to be less than 1mm?

Được hỏi bởi Lorenzo JB Saponetta trên 2018-10-12 06:06:55

Greg Partlow it looks just under 1mm though. but it's sort of an oval type shape instead of a circle

2018-10-25 03:34:47 Hữu ích (1)
Gửi đi
Đáp án (2)

Greg Partlow one thing to note, I had this connected to the original power supply that came with the unit. it did not engrave anodized aluminum this way. I connected the board up to the same power supply that drives the steppers which is a more consistent output and now I can engrave on to anodized aluminum at 300mm/m feed. here's a picture of the laser etching into an anodized aluminum business card https://i.imgur.com/cqiM2qj.jpg

Greg Partlow 12/10/2018
I have this rigged up to a thrown together cnc machine with 4 steppers and 4 tb6600 stepper drivers hooked up to an arduino mega running with grbl and now with this 5W laser engraving module. I wish there were instructions or google searches with people who did this more but there are not. so here's some tips. I found if I put the dangly cable where the power is coming in from connected to the ground on the arduino and the + on the ttl/pwn thing on the right part it works, after doing the $32 enable laser mode on the grbl settings. then throw in some g-code generated from inkspace with some laser plugin (which puts the m3 and m5 gcode to turn on and off the laser module) in to g-code sender platform, it works very well. I engraved a bunch of phallic objects that I can't really add as another picture here due to it being inappropriate and just juvenile but, what other test subject matter is there than a few huge richards to laugh at. the after adjusting the focus a little it makes a very small ~0.5mm burn dot. I tried it on some wood planks I had laying around which made my garage smell wonderful from the burning wood.
Mô-đun khắc laser 450nm 5W ánh sáng màu xanh lá cây với điều chế TTL
US$109.99 US$199.90
13
Bình luận (1)
Greg Partlow 08/10/2018
every part was in a bag. it wasn't protected very well, though it finally came after a month on the slowest boat to navigate the world it came without injury. I need to stop buying these though. I have too many now.
Geekcreit 45 In 1 Bộ cảm biến Mô-đun Bộ khởi động Bộ dụng cụ Hộp carton
US$23.99 US$25.99
1
gợi ý
Bình luận (0)
Greg Partlow 07/10/2018
after this I spiraled out of control. I played and played like a little child and got more and more like an overweight child. now I've used those skills and in about a month turned it in to this as of today. the arduino mega from this kit is in this video, but it's more being like a kid. https://youtu.be/S6ldxnSi8JU
Geekcreit Mega 2560 Bộ khởi động cuối cùng hoàn chỉnh nhất cho Arduino Mega2560 R3 Nano - sản phẩm hoạt động với bảng Arduino chính thức
US$55.99 US$67.99
0
gợi ý
Bình luận (0)
Greg Partlow 03/08/2018
much better than the crap butane one I had before or the cheap 120v one that didn'thave a base. all the tips are the same but at least there's 10 tips
Chất lượng cao 110V US Plug Esd Safe 936 Bộ trạm hàn
US$67.52 US$81.02
0
gợi ý
Bình luận (0)

Bạn là chuyên gia, bạn có thể giúp đỡ?

Chúng tôi chân thành mời bạn đăng ký email Mời Trả lời!

Nếu bạn đăng ký, chúng tôi sẽ mời bạn qua email để trả lời các câu hỏi của mọi người về sản phẩm. Bằng cách đăng ký, bạn cũng sẽ nhận được "Huy hiệu hữu ích "! Bạn có thể hủy đăng ký bất kỳ lúc nào trên trang cài đặt quyền riêng tư.

Giúp đỡ người khác và hạnh phúc hơn!

  • Đăng ký

Về phù hiệu

Huy hiệu có liên quan đến cộng đồng và người dùng kiếm huy hiệu bằng cách tạo nội dung chất lượng, hoàn thành nhiệm vụ hoặc bằng cách tham gia các hoạt động đặc biệt. Người dân cũng sẽ có huy hiệu độc quyền của riêng họ.
Huy hiệu CEO

huy hiệu ceo chỉ thuộc sở hữu của ông chủ banggood.

Huy hiệu bạn có thể kiếm được sẽ sớm ra mắt
  • được

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • được

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe