hawkt45
İçeriklerim
Tüm Mesajlar
İncelemeler
Yorumlar
cevaplar
Sorular

Tüm Mesajlar

hawkt45 01/02/2022
I received this expansion kit, before the SCULPFUN S9 arrived. The kit is very well packet. You get 4 y-axis belts, of which 2 are spare ones, 2 y-axis rails, assembly manual/sketch and an extension cable. This cable has to replace the factory installed cable on the SCULPFUN S9 laser machine, because it is much longer in length. Remove the cover on the controller, via the 4 pan head cap screws, on the rear side. Remove the cable, which has a blue, red, white and blue JST-PH and JST XH plugs. Keep this cable in a safe place. Install the new cable and fit the cover. Thats all.
SCULPFUN S6/S6pro/S9 Lazer Gravür Makinesi Hızlı Montaj için Oyma Alanı Genişletme Kiti
US$99.99 US$199.99
2
Tavsiyeler
Yorumlar (1)
hawkt45 26/04/2023
This consumables kit is a very nice product to have. I selected a 0.8 mm collet size and was supplied with 12 of them. There is also two gas shields supplied with the brass inner nozzle assembly.
15AK Kaynak Torch Tüketim Malzemeleri 14 Parça 0.6mm 0.8mm 0.9mm 1.0mm 1.2mm MIG Torch Gaz Memesi Uç Tutucu
US$9.99 US$39.99
0
Tavsiyeler
Yorumlar (0)
hawkt45 26/04/2023
This item does not come with a battery. The battery size is a number CR2032. The scale reading in degrees is very sensitive and an ideal tool for anybody to use. It is shipped in a box and the item is packed inside a nylon pouch. The pouch has two cords on the open end and can be hung op for storage. Thank you Banggood.
Paslanmaz Çelik 360 Derece Ölçekli Dijital Protractor T Bevel Elektronik Seviye Pil ile Çalışan LCD Ekran Açı Bulucu Kaydırma
US$13.99 US$32.88
0
Tavsiyeler
Yorumlar (0)
hawkt45 29/03/2023
This is an ideal tool to have. The holder has a magnet inside it,which prevents the various bits,from falling out. The holder is machined from aluminium and has a removable cap,which enables a few,not all bits included,to be stored inside it. The removable cap,can rotate inside the holder,so one's finger can be placed on it and used to rotate the holder,when turning in or out,a screw etc. Ideal for a hobbyist etc. Thankyou Banggood
RC Model için 12in1 Çok Fonksiyonlu Tornavida Seti RC Onarım Araçları Seti
US$14.99 US$17.99
0
Tavsiyeler
Yorumlar (0)
hawkt45 13/02/2023
This assorted screw set is ideal for assembling 3D printed RC airplanes. The screws are kept together in their own compartment, in a plastic case. A chart is displayed inside the lid, to the corresponding screw length. Very nice indeed. Thank you Banggood.
Kutulu M2 Çapraz Sürüş Düz Kafa Kendinden Taraflı Vidalar Nikel Kaplamalı Karbon Çelik Ahşap Vida Seti M2 Vidaları Assorti Kiti 800 Adet
US$5.00 US$8.99
0
Tavsiyeler
Yorumlar (0)
hawkt45 19/01/2023
This X-axis upgrade it very good on the Sculpfun S9 and higher speeds can be used, to maintain the same level of accuracy. Very well made and easy to install. Please ensure that you use the supplied extension cable, which reverses the direction of the X-axis stepper motor. This is very important and easy to forget to use.
SCULPFUN S6/S9 X ekseni lineer kılavuz yükseltme kiti Yüksek hassasiyetli endüstriyel sınıf lineer kılavuz kiti Doğrudan kurulum, delme gerektirmez
US$52.99 US$99.99
0
Tavsiyeler
Yorumlar (0)
hawkt45 19/01/2023
Order received in a very short time. Spare belt to be used on GT2 pulleys on 3D printers etc. Thank you Banggood.
3D Yazıcı İçin 5M 2GT-6mm Kauçuk Açılı Zamanlama Kayışı S2M GT2 Kayışı
US$6.00 US$18.00
0
Tavsiyeler
Yorumlar (0)
hawkt45 19/01/2023
Order received in a very short time. These little self-tapping screws are perfect for RC planes, boats etc. Thank you Banggood.
Kutulu M2 Çapraz Sürüş Düz Kafa Kendinden Taraflı Vidalar Nikel Kaplamalı Karbon Çelik Ahşap Vida Seti M2 Vidaları Assorti Kiti 800 Adet
US$5.00 US$8.99
0
Tavsiyeler
Yorumlar (0)
4K WiFi Ultra HD 1080P 16X ZOOM Dijital Video Kamera Lensli ve Mikrofonlu DV Kamera
US$24.99 US$29.99

Q: what is in the box? I surprise for the price

Soran BG213617433 Açık 2022-05-13 06:41:38

hawkt45 You must select the options available, before you do the purchase. You can select what you want to receive with the item.

2022-05-24 12:35:49 Yararlı (0)
Gönder
cevaplar (2)
SMBB1626 Kesme Bıçağı Tutucusu Katlama Kesici Bıçak İçlerine GTN-2 GTN-3 Torna Takımı İçin
US$38.99 US$46.99

Q: Can this holder fit into a 250-000 tool holder? Thanks.

Soran BG056375241 Açık 2021-08-27 05:20:07

hawkt45 No,you must machine some material off the section, which slides into the tool holder and is secured by means of 3 grub screws.

2022-05-14 02:43:30 Yararlı (0)
Gönder
cevaplar (1)
Seramik Buda Tütsü Heykeli Budist Duman Geri Akış Koni Censer Brülör Tutucu Ev Dekor
US$16.37 US$32.73

Q: I never received that item, can at least get my money back?

Soran m_ivanova13 Açık 2019-08-11 03:59:27

hawkt45 Yes,arrange that with Customer Service.

2022-05-14 02:42:10 Yararlı (0)
Gönder
cevaplar (1)
[EU/US Direct] SCULPFUN S9 Lazer Gravür Makinesi Lazer Işın Şekillendirme Teknolojisi Yüksek Hassasiyetli Ahşap Akrilik Lazer Kazıma Makinesi 410x420mm Kazıma Alanı Tam Metal Yapı Hızlı Montaj Tasarımı
US$369.99 US$499.99

Q: will it cut lite-ply and balsa wood?

Soran Chris Channon Açık 2022-04-28 03:30:12

hawkt45 Hello Chris Yes, this laser will easily cut balsa wood and plywood. I would suggest that you purchase an air assist nozzle, for the laser head. This can be 3D printed on any 3D printer and you will have to use an air supply of 35 Ltrs per min. Go online and you`ll see what i am refering to? I build RC planes, so this laser is perfect for wing ribs etc. You won`t be sorry, if you buy it.

2022-04-29 04:46:19 Yararlı (2)
Gönder
cevaplar (3)
hawkt45 18/04/2022
Very good product and highly recommended for RC Electric powered gliders. They are supplied with a propeller hub and mounting bracket. These have a 3.17 mm diameter shaft (1/8").
2 ADET Racerstar BR2826 1290KV 2-4S Fırçasız Motor RC Modelleri için
US$22.99 US$27.59
0
Tavsiyeler
Yorumlar (0)
hawkt45 18/04/2022
This is a very good diode type laser and bought it as a spare one. It comes with a mounting bracket and hardware. Keep your eyes protected, by using good quality goggles. Don`t just ignore this safety precaution.
SCULPFUN S9 Lazer Modülü Lazer Kafa Lazer Oymacı Lazer Oyma Makinesi Lazer Kesici Ahşap Akrilik Kesme Aletler
US$249.99 US$299.99
0
Tavsiyeler
Yorumlar (0)
hawkt45 18/04/2022
This clips onto the filter cartridge and increases the lifespan of the cartridge. Highly recommended to be used.
6800 Gaz Maskesi Tam Yüz Yüz Koruyucu Boyama Püskürtme İçin Filtre Aksesuarları
US$4.00 US$10.37
0
Tavsiyeler
Yorumlar (0)
hawkt45 18/04/2022
I have used this in my workshop and it works very well indeed. I can wear my glasses, with this full face mask. Very good quality and has the option for a single filter cartridge too.
6800 Tam Yüz Gaz Maske Yüz Önleyici Maske Boyama Endüstriyel Koruma
US$27.53 US$37.73
0
Tavsiyeler
Yorumlar (0)
hawkt45 18/04/2022
Good cartridge filter and will protect your lungs, from paint fumes and dust particles etc.
3M 6200 6800 7502 Çift Gaz Maskesi için 6001CN Filtre Pamuk Kılıfı
US$2.99 US$11.99
0
Tavsiyeler
Yorumlar (0)
hawkt45 18/04/2022
These filters will make the life span of the cartridge filters, last longer and can be replaced easily. Very good item and recommended to use them.
10 Adet 5N11 Gaz Maskesi Filtre Pamuk Filtre Kartuş Maske Solunum Cihazı Değiştir
US$9.99 US$18.99
0
Tavsiyeler
Yorumlar (0)
hawkt45 18/04/2022
These are very good milling cutters. keep the feed rate and plunge rates low, to prevent them from breaking.
Drillpro DB-M4 10 adet 0.8 mm Tungsten Çelik Freze Kesici Uçlar 3.175 mm Shank Uç Değirmenler
US$10.99 US$13.99
0
Tavsiyeler
Yorumlar (0)

Uzmansın, yardım edebilir misin?

Sizi Davet Yanıtı e-postasına abone olmaya içtenlikle davet ediyoruz!

Abone olursanız, sizi e-posta yoluyla insanların ürünlerle ilgili sorularını yanıtlamaya davet edeceğiz. Size abone olarak] ayrıca "Yararlı Rozeti " kazanacaksınız! Gizlilik ayarları sayfasından istediğiniz zaman aboneliğinizi iptal edebilirsiniz.

Başkalarına yardım edin ve daha mutlu olun!

  • Abone ol

Rozetler Hakkında

Rozetler toplulukla ilgilidir ve kullanıcılar kaliteli içerik oluşturarak, görevleri tamamlayarak veya özel etkinliklere katılarak rozet kazanırlar. Belirli kişilerin kendi özel rozetlerine sahip olmaları gerekir.
CEO ROZETİ

The CEO ünvanı yalnızca Banggood patronuna aittir.

Kazanabileceğiniz rozetler yakında geliyor
  • TAMAM

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • TAMAM

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe