Tüm Mesajlar

Q: Hi, does it work with LM171w02 TT A1? Thanks in advance!

Soran BG552454141 Açık 2020-09-02 09:51:54

Greg Not directly. You would also need a TMDS converter.

2020-09-02 10:03:38 Yararlı (1)
Gönder
cevaplar (3)

Q: what is the unpopulated IC pads for?

Soran joea32 Açık 2020-08-14 10:50:57

Greg The one with 2 pads is for an external battery. The one with 3 pads is for an external speaker. github.com sharebrained portapack-hackrf blob master hardware portapack_h1 portapack_h1.pdf

2020-08-14 03:57:27 Yararlı (1)
Gönder
cevaplar (1)

Q: hi, is it compatible with LTN140AT35-301 ?

Soran BG172339333 Açık 2020-07-09 02:19:02

Greg Hi, that particular panel is not listed at panelook.com. There are very similar ones on there however, so as an educated guess I would say it is a 30 pin, 6 bit panel at 3.3 volts. It should be compatible, but you may need to put the correct file on a USB stick to correctly configure the driver board and change the settings in the menu.

2020-07-09 02:33:01 Yararlı (0)
Gönder
cevaplar (2)

Q: Does it work for BF UV9R-ERA too?

Soran lukaramazov Açık 2020-01-18 09:34:41

Greg Yes, it does.

2020-04-10 08:41:47 Yararlı (1)
Gönder
cevaplar (2)

Q: what the 3-pin connector on the back is for??

Soran Sr_qq1 Açık 2020-01-26 08:12:43

Greg The white 3 pin connector is for either stereo line output or speaker amp positive output pin. Pin 1 is SPP (Speaker amp positive), pin 2 is ground and pin 3 is SPN (speaker amp negative). You could connect a small speaker across pins 1 and 3 for mono audio out, however installing the metal shell will mean you cannot hear the speaker.

2020-04-10 08:41:13 Yararlı (1)
Gönder
cevaplar (2)