ข้อความทั้งหมด

Q: do you have 6 relay in a one single board which control by 4 button remote control

ถามโดย Naveen บน 2018-02-16 04:04:12

Ted_B 4 buttons allows maximum 4 possible functions, the reason for 4 relays on the circuit board, 1 for each button. If you wish to add more functionality to any one of these four possibilities, you can drive the coil of more than one external relay from each of the circuit board relays. If using external DC relays, make sure you use a diode connected reverse bias across the coil of each external relay coil or inductive load. Likewise if using external AC relays, use a surge suppressor across each coil. This will help protect the contacts on the internal relay when operating inductive loads.

2018-02-24 09:22:16 เป็นประโยชน์ (0)
เสนอ
คำตอบ (1)

Ted_B This is a reversing controller and a switch is required for switching the motor between forward and reverse. I expect "I" and "II" is a misnomer.

2018-02-02 09:29:57 เป็นประโยชน์ (1)
เสนอ
คำตอบ (3)

Q: Why four contacts on the black connector (does it means two motors ?)

ถามโดย DeFCoM บน 2017-11-18 07:59:44

Ted_B Check the photo showing the reverse side of the printed circuit board. Two terminals are for "POWER" supply input and two terminals are for the "MOTOR" connection.

2018-02-02 09:23:48 เป็นประโยชน์ (1)
เสนอ
คำตอบ (2)

Q: What is the PWM frequency and is it fixed or adjustable?

ถามโดย Ted_B บน 2018-02-02 09:06:33

Filiferous Fixed frequency: 25Khz

2018-02-26 03:40:12 เป็นประโยชน์ (0)
เสนอ
คำตอบ (1)