Nice frame for large indoor areas and outside at the park. I built it for 4s battery with Brotherhobby Tornado T1 1407 3600KV motors and a Favourite FVT LittleBee PRO 20Ax4 ESC. Fullsize runcam Owl+ camera and frsky XSR reciever. To get things nice an tight I put in the Team Blacksheep elite bundle for FC,VTX and OSD. I changed the standoffs and screws because I didn't like the original ones. For i buildt it upside down like a pusher, so rolled the FC 180degrees in betaflight and had to ad 45degrees yaw because of the way the FC is mounted in the frame. It's no racing drone but is fun to fly and look at.

Nice frame for large indoor areas and outside at the park. I built it for 4s battery with Brotherhobby Tornado T1 1407 3600KV motors and a Favourite FVT LittleBee PRO 20Ax4 ESC. Fullsize runcam Owl+ camera and frsky XSR reciever. To get things nice an tight I put in the Team Blacksheep elite bundle for FC,VTX and OSD. I changed the standoffs and screws because I didn't like the original ones. For i buildt it upside down like a pusher, so rolled the FC 180degrees in betaflight and had to ad 45degrees yaw because of the way the FC is mounted in the frame. It's no racing drone but is fun to fly and look at.

Nice frame for large indoor areas and outside at the park. I built it for 4s battery with Brotherhobby Tornado T1 1407 3600KV motors and a Favourite FVT LittleBee PRO 20Ax4 ESC. Fullsize runcam Owl+ camera and frsky XSR reciever. To get things nice an tight I put in the Team Blacksheep elite bundle for FC,VTX and OSD. I changed the standoffs and screws because I didn't like the original ones. For i buildt it upside down like a pusher, so rolled the FC 180degrees in betaflight and had to ad 45degrees yaw because of the way the FC is mounted in the frame. It's no racing drone but is fun to fly and look at.

Build this frame with a 1306-3100's (quad prop), racerstar 4 in 1 esc, and Holybro Kakute FC. A couple of the trickier things is fitting the camera properly so that the front props don't hit, plus keeping the weight down in general. Alternatively I could take out the VTX/Camera and put in a tiny whoop camera to shave off a bunch of weight but then I would lose the OSD. There are many options to building this frame, but because it's not too small, it wasn't overly challenging, just need to keep your wires neat.

Build this frame with a 1306-3100's (quad prop), racerstar 4 in 1 esc, and Holybro Kakute FC. A couple of the trickier things is fitting the camera properly so that the front props don't hit, plus keeping the weight down in general. Alternatively I could take out the VTX/Camera and put in a tiny whoop camera to shave off a bunch of weight but then I would lose the OSD. There are many options to building this frame, but because it's not too small, it wasn't overly challenging, just need to keep your wires neat.

Build this frame with a 1306-3100's (quad prop), racerstar 4 in 1 esc, and Holybro Kakute FC. A couple of the trickier things is fitting the camera properly so that the front props don't hit, plus keeping the weight down in general. Alternatively I could take out the VTX/Camera and put in a tiny whoop camera to shave off a bunch of weight but then I would lose the OSD. There are many options to building this frame, but because it's not too small, it wasn't overly challenging, just need to keep your wires neat.

The frame has very high quality. At least the one i got has better characteristics than given in the description: 1. the thickness of the plates is not 1.5, but 1.7 mm 2. The overall weight (plates + spacers + screws, without camera mounter) is only 85 gr; Note that as it already was mentioned, the space between motor mounting holes is 12 mm, so the smallest motor it can fit is 1306. The smaller ones need 9 mm distance.

The frame has very high quality. At least the one i got has better characteristics than given in the description: 1. the thickness of the plates is not 1.5, but 1.7 mm 2. The overall weight (plates + spacers + screws, without camera mounter) is only 85 gr; Note that as it already was mentioned, the space between motor mounting holes is 12 mm, so the smallest motor it can fit is 1306. The smaller ones need 9 mm distance.

The frame has very high quality. At least the one i got has better characteristics than given in the description: 1. the thickness of the plates is not 1.5, but 1.7 mm 2. The overall weight (plates + spacers + screws, without camera mounter) is only 85 gr; Note that as it already was mentioned, the space between motor mounting holes is 12 mm, so the smallest motor it can fit is 1306. The smaller ones need 9 mm distance.

My first 130mm frame. Im satisfied with the frame, with time will see how good is i intend to use it indoor.

My first 130mm frame. Im satisfied with the frame, with time will see how good is i intend to use it indoor.

My first 130mm frame. Im satisfied with the frame, with time will see how good is i intend to use it indoor.

Сама концепция рамы,предусматривае полёты в ограниченном пространстве,так как пропы защищены самой рамой.Место для размещения эллектроники позволят пользовать тодельные ESC камеру и передатчик. Pама великовата для подлётов дома,но с точки зрения штырить между деревьев-самое то!

Сама концепция рамы,предусматривае полёты в ограниченном пространстве,так как пропы защищены самой рамой.Место для размещения эллектроники позволят пользовать тодельные ESC камеру и передатчик. Pама великовата для подлётов дома,но с точки зрения штырить между деревьев-самое то!

Сама концепция рамы,предусматривае полёты в ограниченном пространстве,так как пропы защищены самой рамой.Место для размещения эллектроники позволят пользовать тодельные ESC камеру и передатчик. Pама великовата для подлётов дома,но с точки зрения штырить между деревьев-самое то!

I crashed it dropped it hit a tree pole and other abuse and this frame hold it form without any break or deformity. I just continue flying even after i hit something because propeller is protected. I also save some money on this built because i can save on propeller with this frame.. choose this frame if you're new to the hobby

I crashed it dropped it hit a tree pole and other abuse and this frame hold it form without any break or deformity. I just continue flying even after i hit something because propeller is protected. I also save some money on this built because i can save on propeller with this frame.. choose this frame if you're new to the hobby

I crashed it dropped it hit a tree pole and other abuse and this frame hold it form without any break or deformity. I just continue flying even after i hit something because propeller is protected. I also save some money on this built because i can save on propeller with this frame.. choose this frame if you're new to the hobby

Everything arrived in order. This is a very interesting frame the protectors make it look bigger than a 3 inch quad. Ironically it should be great for tight spaces since you can smash it around and keep flying. I suspect that one will incur efficiency losses with all that extra carbon. Not a racing frame but any means but it should be perfect either for a beginner or an intermediate pilot wanting to get more practise in tight spaces without breaking their quad.

Everything arrived in order. This is a very interesting frame the protectors make it look bigger than a 3 inch quad. Ironically it should be great for tight spaces since you can smash it around and keep flying. I suspect that one will incur efficiency losses with all that extra carbon. Not a racing frame but any means but it should be perfect either for a beginner or an intermediate pilot wanting to get more practise in tight spaces without breaking their quad.

Everything arrived in order. This is a very interesting frame the protectors make it look bigger than a 3 inch quad. Ironically it should be great for tight spaces since you can smash it around and keep flying. I suspect that one will incur efficiency losses with all that extra carbon. Not a racing frame but any means but it should be perfect either for a beginner or an intermediate pilot wanting to get more practise in tight spaces without breaking their quad.

Seems pretty solid when assembled, But building is going to be fun as space is VERY limited. Trying to squeeze a VTX board, 4 ESC's, A PDB, An FC and a RX in this tiny frame is going to be a challenge. Not an impossible build, But I think this is one where component choice will be crucial to be able to get it all together. Possibly I'll end up trimming the frame at the top front to allow me arial clearance to use an AIO cam/VTX on this, And I'm also thinking I might have to depin and directly wire the FC and RX, But it's definitely doable.

Seems pretty solid when assembled, But building is going to be fun as space is VERY limited. Trying to squeeze a VTX board, 4 ESC's, A PDB, An FC and a RX in this tiny frame is going to be a challenge. Not an impossible build, But I think this is one where component choice will be crucial to be able to get it all together. Possibly I'll end up trimming the frame at the top front to allow me arial clearance to use an AIO cam/VTX on this, And I'm also thinking I might have to depin and directly wire the FC and RX, But it's definitely doable.

Seems pretty solid when assembled, But building is going to be fun as space is VERY limited. Trying to squeeze a VTX board, 4 ESC's, A PDB, An FC and a RX in this tiny frame is going to be a challenge. Not an impossible build, But I think this is one where component choice will be crucial to be able to get it all together. Possibly I'll end up trimming the frame at the top front to allow me arial clearance to use an AIO cam/VTX on this, And I'm also thinking I might have to depin and directly wire the FC and RX, But it's definitely doable.

good frame, good material. i use 1806 2300kv motor and it's fail. this frame need 4000kv 1306motor. thanks BG

good frame, good material. i use 1806 2300kv motor and it's fail. this frame need 4000kv 1306motor. thanks BG

good frame, good material. i use 1806 2300kv motor and it's fail. this frame need 4000kv 1306motor. thanks BG

Good

Good

Good