NVR doesn't work. After turning on, the process stops and does not connect to the network. If there is a DHCP permit, the connection will not start. It is also not connected when entering a fixed IP. If you skip the connection operation, you cannot connect the camera afterwards, the camera will not be found. The NVR has been checked by IT professional, says the device's network panel is bad. He said it was not worth repairing, more expensive repair than device.

NVR doesn't work. After turning on, the process stops and does not connect to the network. If there is a DHCP permit, the connection will not start. It is also not connected when entering a fixed IP. If you skip the connection operation, you cannot connect the camera afterwards, the camera will not be found. The NVR has been checked by IT professional, says the device's network panel is bad. He said it was not worth repairing, more expensive repair than device.

NVR doesn't work. After turning on, the process stops and does not connect to the network. If there is a DHCP permit, the connection will not start. It is also not connected when entering a fixed IP. If you skip the connection operation, you cannot connect the camera afterwards, the camera will not be found. The NVR has been checked by IT professional, says the device's network panel is bad. He said it was not worth repairing, more expensive repair than device.

OK

OK

OK