notyoung
notyoung Not mentioned in the one page manual.
2023-12-19 05:18:53 Užitočné (0)
notyoung Yes. It's switchable from C to F.
2023-12-19 05:18:18 Užitočné (0)Q: I want to weld an existing metal strip. What thickness can it weld?
Na otázku BG416654423 na 2023-03-08 11:42:03
notyoung Welding thickness: 0.1-0.15mm
2023-03-08 12:51:56 Užitočné (0)Q: Does it have an activity (read/write) indicator(s)?
Na otázku BG513217491 na 2022-12-07 08:36:42
notyoung Not that I noticed ;-) Just power.
2022-12-07 02:58:21 Užitočné (1)Q: what is the white wire for?
Na otázku BG131214613 na 2022-07-23 05:39:58
notyoung Red is positive power. Black is negative power. White goes to voltage to be read. Back of PCB has "Vin".
2022-07-24 09:42:29 Užitočné (2)
notyoung No. The two inputs are simply in parallel to allow using smaller wire from the solar panels. Be aware that the PowMr has limits on the lowest and highest solar panel voltages for a given battery bank, such as 20-80 volts solar for a 12 volt battery. Read the manual carefully and be very aware that the PowMr REQUIRES at least 20 volts solar input for a 12 volt battery. That means a single 100 watt panel will probably NOT work as the panel's under-load voltage will be in the range of 17-18 volts and that's not enough.
2022-06-17 03:52:11 Užitočné (1)Q: Good day. Can I test 1.5V,4V and 9V Batteries with this multimeter?
Na otázku goldencosta na 2021-06-09 06:20:03
notyoung You can measure the voltage of the batteries but that tells you very little about the battery's remaining capacity. For that, you need a battery tester which tests the battery under load.
2021-06-09 04:22:25 Užitočné (0)
notyoung No wattage ratings. The 4 models are rated in lumens: A=1000, B=1500, C=3000, D=4500. You can find charts of "lumens to incandescent watts" online.
2021-02-19 05:32:59 Užitočné (1)Q: Does the remote need batteries?
Na otázku DSQUARED na 2021-02-12 07:22:55
notyoung Yes.
2021-02-12 04:57:34 Užitočné (0)
notyoung The output current is determined by the chips used in the DC-DC converter. Using a larger battery will provide longer charging time but will NOT increase the output current.
2020-09-15 11:19:59 Užitočné (0)Q: Can I use with Lead-Acid battery?
Na otázku witb na 2020-08-07 12:45:23
notyoung You can use it with any type battery IF you set the voltage range correctly.
2020-08-07 01:17:04 Užitočné (1)
saijulie Thanks for your information to aware about SOLAR Panel
2019-11-06 08:24:24 Užitočné (11)
notyoung Soundsvery much like the older MakeSkyBlue firmware which didn't respond well to solar changes and sometimes not to steady solar power for hours - just taking the panels to their minimum voltage and not doing the MPPT check again. It seems programming an MPPT controller to truly track the solar input as something of an art and not understood by all who try.
Úprimne vás pozývame na prihlásenie na odber e-mailu s odpoveďou Pozvať!
Ak sa prihlásite na odber, pozveme vás prostredníctvom e-mailu na zodpovedanie otázok, ktoré majú ľudia k produktom. Prihlásením na odber získate aj „Odznak za pomoc“! Odber môžete kedykoľvek zrušiť na stránke nastavení ochrany osobných údajov.
Pomôžte ostatným a buďte šťastnejší!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
