Все сообщения

Q: can you hook an xm+ to this board? not sure if that’s an sbus, or inverted sbus

Задавает Jsimpson95692 на 2020-12-05 01:50:55

James Takala yes you can hook up an xm+ thats what i had in mine

2020-12-05 06:56:06 полезный (0)
Оплатить
ответы (1)

James Takala Ya it would work great on a whoop I actually have it mounted on my 3" and I get superb picture and range

2020-04-16 01:41:54 полезный (0)
Оплатить
ответы (3)

James Takala There are plenty of videos on YouTube on soldering you might want to check them out. When u lay your bead of solder down on the pad it will fill in the gap

2020-02-16 11:16:34 полезный (2)
Оплатить
ответы (3)

James Takala This is best suited for a 5-6s build if u want to use 3s there are alot of cheaper fc esc combos available 50amp esc is waaay over kill for 3s

2020-02-16 11:13:47 полезный (0)
Оплатить
ответы (5)

Q: can you use 4s batteries on this?

Задавает nelly на 2019-08-19 04:15:51

James Takala Yes it is 4s capable I would recommend a 4s 850 miliamp tattu lipo for best performance to weight ratio

2020-01-09 09:40:29 полезный (1)
Оплатить
ответы (5)

Q: does It have VTX ? and can I use it with the KingKong fly egg 130mm?

Задавает Leirós на 2018-05-01 07:27:38

James Takala but it is compatible for the kk 220 frame from king kong

2018-11-17 09:08:23 полезный (0)
Оплатить
ответы (4)

Q: can it use flysky receiver ibus

Задавает josephvo2203 на 2018-11-16 07:30:26

James Takala yes u can use ibus . Sauder your receiver to the dsmx pin and config it in betaflight.

2018-11-17 09:05:37 полезный (0)
Оплатить
ответы (1)

Q: what size stack can I put in the frame ? 20x20

Задавает James Takala на 2018-10-28 12:20:27

Sandy You can use 20x20mm or 30.5x30.5mm stack.

2018-11-02 03:25:58 полезный (0)
Оплатить
ответы (1)