Precise details:
Description:
XY-PDS100 is a Fast-Charger Converter Module. It can make a ordinary power supply becomes a fast-charger module.It supports QC4.0 and PD3.0 protocol with dual voltage input and dual USB output.
Features:
- Dual voltage input interface
- Dual USB output
- Voltage and current display
- Fast-Charger converter
- Support 100W high power
Parameters:
Model:XY-PDS100
Input Voltage:DC 12.0V~28V
Input Power:100W at Max(more 87W for PD charger)
Type-C USB Output:DC 5V-20V 100W(Max)
Type-A USB Output:DC 5V-12V 100W(36)
Support protocol:QC4.0 and PD3.0
Working Temperature range:-20℃~85℃
Working Humidity range:0%-95%RH
Size:54*46*20mm
Set Mode:
1>.Screen parameter:
1.1>.Screen display input voltage without output at Type-A and Type-C USB.
1.2>.Screen display Type-A’s output voltage and output current in turns when just output at Type-A USB terminal.
1.3>.Screen display Type-C’s output voltage and output current in turns when just output at Type-C USB terminal.
1.4>.Screen display output voltage,output current at Type-A and output current at Type-C when output at both Type-A and Type-C USB terminal.
2>.Display charging protocol:
2.1>.Automatically detect the output fast charging protocol every time after activating the output.
2.2>.XY-PDS100 did not trigger any fast charging protocol if display ‘---’.
2.3>.Trigger output QC2.0 protocol if display ‘C2.0’.
2.4>.Trigger output QC3.0 protocol if display ‘C3.0’.
2.5>.Trigger output FCP protocol if display ‘FCP’.
2.6>.Trigger output SCP protocol if display ‘SCP’.
2.7>.Trigger output PD2.0 protocol if display ‘PD2’.
2.8>.Trigger output PD3.0 protocol if display ‘PD3’.
2.9>.Trigger output PE1.1 protocol if display ‘PE1’.
2.10>.Trigger output PE2.1 protocol if display ‘PE2’.
2.11>.Trigger output LVDC protocol if display ‘Ldc’.
3>.Screen will turn OFF and indicator keep ON without any operate in 10 minutes.
Note:
1.XY-PDS100 will output 20V when use a PD charger as input and recommend 87W PD charger at this time.
2. XY-PDS100 just can output 5V at output terminal when connect loads at both USB terminal.
3. It is recommended to use Type-C USB terminal for QC4+/QC4.0/PD3.0 and other protocols.
4. It needs use Type-A terminal for OPPO-phone.
5. It is strongly recommended to use the original data cable.
Application:
Charger converter
Charger tester
Charger factory
Package Included:
1 x XY-PDS100 QC4.0 PD3.0 Fast-Charger Module
