MartinC
Meu conteúdo
Todas as mensagens
Comentários
Comentários
respostas
Questões

Todas as mensagens

MartinC 10/04/2019
Used this for the first time today, worked far better than I expected, laser printed a small circuit, taped it to pcb material that had been cleaned with alcohol following cleaning with fine steel wool and then ironed it in place. The backing paper peeled clean off and left an accurate pcb mask on the copper. I etched with ferrous chloride and was left with a perfect pcb. Only criticism was that the paper was poorly protected in the post and `i had to leave it under a heavy weight for a few days to flatten it to an acceptable level to be used in my HP laser printer. I found that my printer will take these A4 sheets cut into quarters, i.e. A6. this makes it a lot more economical to use. My next experiment is to see if it can be re used for another copy of the circuit. I will definitely be buying more of this in the future.
10 folhas A4 de papel de transferência térmica para PCB Toner para protótipo eletrônico DIY. Placa de circuito impresso PCB
US$3.49 US$4.49
1
Recomendações
Comentários (0)
MartinC 12/02/2019
I use these with salvaged Li-ion/ Li-Po cells along with a small boost converters to power LED’s in 3D printed light fittings and displays.
Placa de proteção de carregamento de bateria de lítio TP4056 Micro USB 5V 1A 10Pcs TE585 Módulo carregador Lipo
US$6.00 US$11.99
0
Recomendações
Comentários (0)
MartinC 25/03/2019
These are a direct replacement for Gilllette blades and seem just as good only a fraction of the price.
GFLV® 16pcs 5 camadas de lâminas de barbear Navalha Reposição das cabeças de barbear para Gillette
US$19.99 US$29.99
0
Recomendações
Comentários (0)
MartinC 29/05/2019
excellent little lights, quite bright on full brightness but even on a lower setting to conserve battery life the are bright enough to achieve a good effect. remote control works well and at a reasonable range. haven’t tried submerging them yet but have been left outside for a week in heavy rain with no ill effects.
10X Controle Remoto impermeável RGB submersível LED vela Chá candeeiro de mesa de luz decoração
US$12.33 US$13.67
0
Recomendações
Comentários (0)
MartinC 01/08/2019
neat little module, easy to set up and use.
3Pcs DS3231 AT24C32 IIC Real Time Relógio Módulo Geekcreit para Arduino - produtos que funcionam com placas Arduino oficiais
US$5.63
0
Recomendações
Comentários (0)
MartinC 01/08/2019
neat little unit. does what I need it to.
Testador de Transistor LCR-T4 12864 LCD Graphical da Geekcreit® Resistência de Capacitância ESR SCR Medidor
US$12.99 US$17.99
0
Recomendações
Comentários (0)
MartinC 01/08/2019
As described. fit breadboards well.
120pcs cabo jumper de 20cm macho para macho para breadboard, cabo Dupont
US$5.99 US$6.99
0
Recomendações
Comentários (0)
Módulo de redução do conversor de Buck da fonte de alimentação ajustável DC-DC
US$7.99 US$9.99

Q: What is the EN pin on the input for?

perguntado por MartinC sobre 2019-04-18 01:57:42

APteH EN is chip enable. A high is Enable, low is disable

2019-05-20 06:42:31 Útil (2)
Enviar
respostas (3)
MartinC 10/04/2019
Perfect for cleaning up holes in models that have been 3D printed. I now deliberately make the holes a fraction smaller than needed so that I can use this tool to achieve perfect holes.
Raitool™ DT01 Lâmina de Fresagem Profissional Filtro de Borda Ferramenta Furadeira Universal 0-14mm
US$7.99 US$9.99
0
Recomendações
Comentários (0)
MartinC 25/03/2019
excellent for micro controller projects suck as arduino controlled lighting.
Módulo de relé de acoplador óptico de gatilho de nível de canal 1 de 5V
US$2.99 US$8.99
0
Recomendações
Comentários (0)
MartinC 25/03/2019
excellent. use them for running esp8266 based projects from mains supply. such as Alexa controlled sockets and lights.
Módulo de fonte de alimentação isolada AC-DC Step Down de 5V 700mA 3.5W 3Pcs
US$9.99 US$11.99
0
Recomendações
Comentários (0)
MartinC 25/03/2019
exactly what they claim to be, good selection of cheap resistors. you just need to find an appropriate method of storage as they are just strips of resistors.
1000pcs 5% 1 / 2W 0.5W filme de metal resistor 50 valores kit assorted 0.1 ohm ~ 4.7m ohm capacitor
US$13.99 US$16.99
0
Recomendações
Comentários (0)
MartinC 12/02/2019
I used one of these to repair a faulty touch sensitive lamp and it fitted as a direct replacement. This has 3 light levels as opposed to just the on/off unit that it replaced. Be aware that it is not suitable for led or cfl lamps, just filament or halogen bulbs. I think that is how the original one was destroyed.
AC 220V 3 vias Touch Control Sensor Switch Dimmer Lamp Peças de luz de mesa
US$7.99 US$10.99
0
Recomendações
Comentários (0)
MartinC 09/02/2019
Used this to power an LED display light, measured capacity appears to be 1750 mAh when measured using a TP4056 as charge controller and discharging at a current of 40 mA.
Eachine EV800 óculos FPV poupar parte da bateria de 3.7V 2000mAh lipo
US$11.41 US$13.69
0
Recomendações
Comentários (0)
MartinC 16/10/2018
I have bought several of these and so far they have all been reliable. I use them with usb led light bars for under cupboard lighting. they get quite warm after prolonged use at 5w output but remain reliable up to now. (about a month of every day use) will definitely order more.
UK Home Wall 3 pinos USB Plug Power Adapter Charger para iPhone 6S Plus Tablet de telefone celular
US$1.99
0
Recomendações
Comentários (0)
MartinC 16/10/2018
this is my second batch of glue, use it for insulating electrical repairs and projects as well as general purpose hobby use. with a variable temperature gun this can be used either hot and very fluid or cooler and bulky, either way it sticks extremely well. can be rather stringy at lower temperatures but not difficult to deal with with practice.
10pcs 11mm x 247mm EVA Clear Hot Melt Glue Adhesive Sticks For Glue Gun
US$4.16 US$15.99
0
Recomendações
Comentários (0)
MartinC 28/06/2018
accurate and bright display. use this wiring diagram but ignore the shunt.
Medidor de Calibre Tensão Painel Amperímetro Medidor de Tensão Digita LED Azul Vermelho Duplo
US$7.50 US$9.00
4
Recomendações
Comentários (0)
MartinC 20/03/2018
Especially as these come with the appropriate spare mandrels these make a cheap way of topping up your sanding drums, far cheaper than buying locally and of comparable quality. I use these in a Dremel but I believe they will fit any similar rotary tool. My wife also uses them in her electric nail tool for when she is dealing with acrylic nails. I have bought her her own set so I don't have to keep searching for mine!
Kit de tambores de lixa de grão 120 com 102 peças e mandris de lixamento de 1/2, 3/8 e 1/4 de polegada compatíveis com ferramentas rotativas Dremel
US$6.00 US$11.99
0
Recomendações
Comentários (0)
MartinC 20/03/2018
These are not very sturdy but more than adequate for small components.
5pcs Geekcreit® 24 Value Componentes eletrônicos Storage Assortment Box
US$19.99 US$23.99
0
Recomendações
Comentários (0)
MartinC 20/03/2018
I use these when I need to use AA or AAA batteries in 3D printed projects. More than adequate for this purpose, easy enough to include 1s,2s,3s or more cell holders in designs. I have even used them for 18650 cells in low current applications as I don't think they would be up to carrying any more current than a typical AA cell can deliver due to the thin material they are made of.
10 pares de prata tom de bateria placa de metal mola definido para baterias AA AAA
US$2.99 US$3.99
0
Recomendações
Comentários (0)

Você é o especialista, pode ajudar?

Sinceramente, o convidamos a se inscrever para receber o e-mail de resposta ao convite!

Se você se inscrever, nós o convidaremos por e-mail para responder a perguntas que as pessoas tenham sobre os produtos. Ao se inscrever, você] também ganhará o "Emblema de útil "! Você pode cancelar a assinatura a qualquer momento na página de configurações de privacidade.

Ajude os outros e seja mais feliz!

  • Se inscrever

Sobre crachás

Os crachás estão relacionados à comunidade e os usuários ganham crachás criando conteúdo de qualidade, completando missões ou participando de atividades especiais. Pessoas específicas também terão seu crachá exclusivo.
Crachá do CEO

O Distintivo do CEO pertence apenas ao chefe da Banggood.

Os crachás que pode ganhar está chegando em breve
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe