Todas as mensagens

Q: analog compatible?

perguntado por TRXRider31 sobre 2023-05-07 01:59:30

Chitarrone Yes, you can click " manual" showed on product page. It shows how to connect 5.8G VTX and Camera

2023-05-09 03:54:08 Útil (0)
Enviar
respostas (1)

Ramalamajama It is in fact a 5” frame but it’s different than the one pictured here.

2023-01-20 04:54:23 Útil (1)
Enviar
respostas (2)

Q: Black box??? 8k & 8k or 8k & 4k??

perguntado por TRXRider31 sobre 2018-07-05 05:48:57

Gilberto There is no SD card insert at this FC (you can buy one and connect it separately spending an UART if you want). And yes, this board can hold 8K/8K as the gyro holds until 8K.

2018-07-08 11:25:00 Útil (0)
Enviar
respostas (1)

alexandr_xv Обратитесь с этим вопросом в службу поддержку. Отвечают всегда быстро и правильно!

2022-03-10 02:43:49 Útil (0)
Enviar
respostas (3)

Q: What's different with the pro version.

perguntado por TRXRider31 sobre 2021-01-13 06:43:21

The seller There is lack of information.

2021-02-05 09:40:53 Útil (0)
Enviar
respostas (1)

TRXRider31 Thank you for the detailed instructions you posted. I can manage fairly well with larger electrical items in homes and on autos and such, but I am lost with items like this. I did manage to build and fly a few FPV drones on my own, aided by Google of course. Google didn't help me with this as much as you did.Thanks again!!

ConceRodz 11/08/2020
Nice and simple. Working as described. Here is the connection information if you need it. =>Automatic Irrigation Pump<= Connect + (sensor board) to soil probe. Connect - (sensor board) to soil probe. Connect VCC (sensor board) to battery positive. Connect GND (sensor board) to battery negative. Connect D0 (sensor board) to B-1A (motor controller board). Connect VCC (motor controller board) to battery positive. Connect GND (motor controller board) to battery negative. Connect B-2A (motor controller board) to battery negative. Connect pump - (motor controller board) to Motor B terminal #1 (board with screw on terminals on the right side). Connect pump + (motor controller board) to Motor B terminal #2 (board with screw on terminals on the right side). =>Testing<= 1. Place pump in water (pump cannot run dry). Connect the red wire of the pump to battery positive Connect the black wire of the pump to battery negative 2. Test the motor controller board: Connect VCC (motor controller board) to battery positive. Connect GND (motor controller board) to battery negative. Connect B-2A (motor controller board) to battery negative. Place pump in water (pump cannot run dry). Connect pump - (motor controller board) to Motor B terminal #1 (board with screw on terminals on the right side). Connect pump + (motor controller board) to Motor B terminal #2 (board with screw on terminals on the right side). B-1A on motor controller board activates pump when connected to battery negative. 3. Test the soil moisture sensor module: Connect + (sensor board) to soil probe. Connect - (sensor board) to soil probe. Connect VCC (sensor board) to battery positive. Connect GND (sensor board) to battery negative. The red power lamp is always on. The green/blue led will blink once. Dip the probe directly into water (covering only the probe metal tip) the green/blue light will on.
4
Comentários (1)

Q: IS IT FIRE PROOF

perguntado por dot sobre 2019-08-14 08:34:33

TRXRider31 No it is not.

2020-03-19 06:18:35 Útil (0)
Enviar
respostas (1)

Q: Will k130 fit?

perguntado por TRXRider31 sobre 2020-01-21 02:50:02

Carbylam small for k130

2020-01-22 12:58:37 Útil (0)
Enviar
respostas (1)

Q: do these come with a hand maiden to froth your oyster?

perguntado por Knjlexus sobre 2019-03-13 09:41:30

TRXRider31 But of course they do sir.

2019-12-25 02:02:58 Útil (0)
Enviar
respostas (1)

Q: is this price for a set of 4 motors?

perguntado por vpaulsmith3 sobre 2019-01-21 08:58:05

TRXRider31 Surely a mistake. No way this is more than others.

2019-01-21 09:55:20 Útil (0)
Enviar
respostas (6)