francescosalmaso Yes,if your motor dosen't consume more than 400W

francescosalmaso I don't know if it works with the QX65, but you can put the trotthole where you want, since all joysticks and switches can be configured on the radio.

francescosalmaso CN is shipped from China, CZ is shipped from Czech Republic

francescosalmaso è compreso anche il carello.

francescosalmaso yes, but you need to buy drivers to use this board, I suggest you to use it with TMCs

francescosalmaso Yes, there is the FCC version, the. batteries are not included, it needs two Li-ion 18650

francescosalmaso I used a 3D printed enclosure to mount it on my drone or you can just use a pair of zip ties

francescosalmaso protocols supported without external module are the following: ACCESS up to 24CH and ACCST IN 8 and 16 CH mode

francescosalmaso there is no R-XSR ultra model, this is the smallest reciever from FrSky

francescosalmaso Yes

francescosalmaso Yes, you can. This can be used on any controller board with the pololu stepper driver standard.

francescosalmaso The maximum movement of the slide block is given by the length of the rail minus the lebght of the sliding block (for MGN12H is always 45.4 mm). So if you choose a rail of 500mm the maximum linear movement is 454.6 mm

francescosalmaso Wowstick has less torque then Mijia, but is still perfect with small devices, like phones laptops, ecc.