Machifit WS55-140 300W Spindle Motor Clamp Power Supply Driver Controller for CNC Engraving Machine
A part of the review has been auto-translated.
product arrived quickly but slightly damaged with a malfunction The power box has a shot see photo but it works and the display it lacks a part of the display c is more annoying see photo the spindle works (just a fly mount to test that the whole works) I will actually validate during the assembly on my milling machine but currently not the time yet
good quality and working great.
good
Very useful spindle drive, exactly as described. I use two of them all day. Thank you.
ok
good packing and good item condition
Product as described, well packaged and delivered within a reasonable time. It has yet to be implemented to assess the quality of the components. To be continued...
Delivered in less week in France from the CZ warehouse Just received, not yet mounted on my CNC, but the material seems of good quality, it breathes solidity. The spindle alone weighs approximately 800 g (information not available on the site) and has no lateral or longitudinal clearance. I just tested it by holding it in hand: Very silent and no vibration felt. The advertised speed of 14,000 rpm is reached empty. The only point that worries me a little: it heats strongly in the lower part (on the stainless part near the ER 11), you can almost not leave the hand continuously. The threaded holes on this lower part seem to be used to evacuate the air blown by the top fan and their surface area is much smaller than the air inlet! perhaps an area for improvement? I wanted to fix it by these screws on a NEMA 23 motor square, the dimensions of which are perfectly suitable and in particular the central hole allows the lower part of the engine to pass without play. It may be preferable to use the supplied aluminium bracket which can be used as a radiator... In any case I am satisfied with this purchase that I recommend.
Looks good , somehow I expected the psu and drive as well but my fault during ordering .
For the price ok.