Nice packaging. Everything is included to start your build. XT30 connector, capacitor and harness. nice quality, easy to solder, works and flies great. A fine point soldering tip is required for the small pads. Your buzzer and LED connection is located in the harness. Three full Uarts. I am using the board with the capacitor and an HGLRC VTX. camera and VTX are direct connected to the board. The video works perfect. No visual lines. Great Price!

Nice packaging. Everything is included to start your build. XT30 connector, capacitor and harness. nice quality, easy to solder, works and flies great. A fine point soldering tip is required for the small pads. Your buzzer and LED connection is located in the harness. Three full Uarts. I am using the board with the capacitor and an HGLRC VTX. camera and VTX are direct connected to the board. The video works perfect. No visual lines. Great Price!

Nice packaging. Everything is included to start your build. XT30 connector, capacitor and harness. nice quality, easy to solder, works and flies great. A fine point soldering tip is required for the small pads. Your buzzer and LED connection is located in the harness. Three full Uarts. I am using the board with the capacitor and an HGLRC VTX. camera and VTX are direct connected to the board. The video works perfect. No visual lines. Great Price!

Overall I think this is an excellent all-in-one board - however it could be a bit cheaper. Couple of things to watch out for: the VTX power pads are unregulated straight off the battery - NOT 5v - so be careful what voltage your VTX can take you may not be able to use them. Also I really wish they would include silicon’s wires instead of the plastic coated ones not great at this price. However - it seems to perform well upgraded Betaflight and BLHeli to latest versions no problems - makes for a tidy build but at a price!

Overall I think this is an excellent all-in-one board - however it could be a bit cheaper. Couple of things to watch out for: the VTX power pads are unregulated straight off the battery - NOT 5v - so be careful what voltage your VTX can take you may not be able to use them. Also I really wish they would include silicon’s wires instead of the plastic coated ones not great at this price. However - it seems to perform well upgraded Betaflight and BLHeli to latest versions no problems - makes for a tidy build but at a price!

Overall I think this is an excellent all-in-one board - however it could be a bit cheaper. Couple of things to watch out for: the VTX power pads are unregulated straight off the battery - NOT 5v - so be careful what voltage your VTX can take you may not be able to use them. Also I really wish they would include silicon’s wires instead of the plastic coated ones not great at this price. However - it seems to perform well upgraded Betaflight and BLHeli to latest versions no problems - makes for a tidy build but at a price!

good

good

good

i wanna try it on 4S. Will it survive?

i wanna try it on 4S. Will it survive?

i wanna try it on 4S. Will it survive?

만족스럽네요~

만족스럽네요~

만족스럽네요~

The board looked Awesome, and had everything you needed to get it up and running.

The board looked Awesome, and had everything you needed to get it up and running.

The board looked Awesome, and had everything you needed to get it up and running.

Impressively low weight.

Impressively low weight.

Impressively low weight.

great for motors which simply max at 3S, or if you need extra stack space, the Zeus does the job. plenty of UARTs for Tramp or GPS or both.

great for motors which simply max at 3S, or if you need extra stack space, the Zeus does the job. plenty of UARTs for Tramp or GPS or both.

great for motors which simply max at 3S, or if you need extra stack space, the Zeus does the job. plenty of UARTs for Tramp or GPS or both.

나쁘지 않네요

나쁘지 않네요

나쁘지 않네요

Another easy build using the Zeus AIO. Immediately updated to BF 4.0.5. Works great with Amax 1106 6300kv motors. Two of them up and running. One on a 2" and one on a 2.5". Both quads are flying great. Used the provided cap and direct soldered the VTX and Camera to the supplied pads on the FC. I have a nice clear camera and video coming to the Goggles.

Another easy build using the Zeus AIO. Immediately updated to BF 4.0.5. Works great with Amax 1106 6300kv motors. Two of them up and running. One on a 2" and one on a 2.5". Both quads are flying great. Used the provided cap and direct soldered the VTX and Camera to the supplied pads on the FC. I have a nice clear camera and video coming to the Goggles.

Another easy build using the Zeus AIO. Immediately updated to BF 4.0.5. Works great with Amax 1106 6300kv motors. Two of them up and running. One on a 2" and one on a 2.5". Both quads are flying great. Used the provided cap and direct soldered the VTX and Camera to the supplied pads on the FC. I have a nice clear camera and video coming to the Goggles.