Dancing Wings Hobby DW T30 1400 1.4m Wingspan Balsa Wood Trainer RC Airplane DIY Model Kit
A part of the review has been auto-translated.
It is not the easiest to build, but it went well. I've had it in the air and it's flying well.
I am very impressed with this kit. The laser cutting is very accurate and the quality of both the balsa and light ply is very good too. All parts have fitted well with little to no sanding needed. On some of the light ply the laser has not cut through completely but that is not too difficult to overcome with a razor blade. The parts are clearly labelled and not difficult to locate. All fuselage parts are labelled F, All wing parts are labelled W etc. The photo instructions are perfectly clear for anyone to follow no matter their native language. I'm confident I'll soon have a plane the equivalent of a Phoenix Tiger for much less cost plus I'll have had the enjoyment and satisfaction of building it. At present the fuse is almost finished. Then it's on to the wing.
AVION IN KIT very nice to build and which flies very well with a 9cc NGH engine
Nicely done kit. The instructions could be more detailed. If you've already built a scatter you won't have a problem. In the building I bought one plate was marked from the other side and so two dilkas had a changed name (only a minor defect on the beauty).
Der Bausatz kommt mit den erforderlichen Kleinteilen in einem verhältnismäßig kleinem Päckchen. Anleitung farbiger duplexdruck mit englischer Beschreibung und vielen Zeichnungen ist dabei Der Einbau eines 2 oder 4-Takt Motors ist laut dieser Baubeschreibung ebenfalls möglich.
I have flight performance that I can perform the F3A pattern without problems. Since aircraft manufacturing is an inlay type, there is little madness and the aircraft can be completed without distortion. Reinforcement material is adequately applied to the main wing, and the body part also uses aviation veneers and the strength of the aircraft is sufficient. Since the flight weight is less than 2 kg with the Lipo battery, it can take off with a skate of 2 to 3 m. It is a very excellent aircraft.
excelente todo llego en orden y el envió fue mucho más rápido de lo estimado. Recomiendo mucho a este vendedor...
very nice kit
nice and simple airplane, laser cut parts are nice and accurate, it will be a good plane to teach new pilots to fly , it is well worth the money.
This is my second T30, they fly well.