Openlog Blackbox Cleanflight Voor Naze32 SP Racing F3 CC3D Flight Flash MicroSD Data Recorder UART
Een deel van de recensie is automatisch vertaald.
I hope it works as good as it looks.
Looks like it works perfectly. Mine came pre-loaded with the recommended software, so no flashing required. I used the included straight pins and surface mounted them to keep the whole package as thin as possible.
Nice tool for tuning drones!
Small Blackbox log file storage module used to save flight controller telemetry data to SD card. Connects to controller UART port and may utilize data transfer speed up to 256000. Log files may be loaded directly from SD card or via USB/Serial converter. Supported in CleanFlight and BetaFlight. Log collection and retrieving with this module is easy and fast. It is enormously useful in initial quadrocopter configuration for flight controllers which doesn't have SD card writer or have only built-in flash RAM storage which is awfully slow to read.
This works , but I have had to flash it with latest firmware.
pas encore branché mais je me languis
got this one to setup as external blackbox for a kiss fc but haven't tested it yet, the pcb seems good quality
Отличная вещь. Удобно для первоначальной настройке квадриков. Не нужно постоянно перекачивать данные после каждого полета, а можно налетать сколько угодно, а потом дома уже скачать логи. Пришел запакованный в 5 слоев мягкого поролона.
very small device for recording flight data
Mine arrived bricked. There are no really SPI/ISP pads (only vias protected). So I had to solder AWG30 wire in the vias to reprogram the fuses, the bootloader and the flash with official openlog sketch. The flash was empty. Basically, the hardware is fine, I don't understand why there is an external quartz which is not used, but the software was not installed at all. I managed to fix it. If yours seem to be bricked at arrival, maybe it is simply not flashed. good luck.