초대 답변 이메일을 구독하도록 진심으로 초대합니다!
구독하면 이메일을 통해 사람들이 제품에 대한 질문에 답변하도록 초대합니다. 구독하면 "유용한 배지 "도받을 수 있습니다. 개인 정보 보호 설정 페이지에서 언제든지 구독을 취소 할 수 있습니다.
다른 사람들을 돕고 더 행복해 지세요!
모든 메시지
Q: Dose it work with a 40ch video transmitter?
로 질문하기 BG524333263 에 2021-03-16 08:18:28
nmw01223 It works with any 5.8ghz analogue video transmitter.
2021-03-17 12:18:31 도움이되는 (1)대답 (2)
Q: can anyone suggest which are the best long range antennas(omni and directional) for this goggles?
로 질문하기 HomarIvan 에 2020-12-09 02:03:29
nmw01223 I use a Foxeer pagoda and triple-feed patch (both SMA male, right handed), seems OK.
2020-12-09 03:19:21 도움이되는 (0)대답 (4)
Q: can i connect this to eachine tx*****ch fpv camera???
로 질문하기 BG431140211 에 2020-09-30 10:01:54
nmw01223 It should work fine with any camera transmitting the standard analogue signal in the 5.8Ghz band, NTSC or PAL. Not familiar with that specific camera, but if it is a standard FPV camera - then yes.
2020-09-30 11:32:22 도움이되는 (0)대답 (4)
Q: is this better than the irange irx4 one? and does it come with the latest updates?
로 질문하기 BG163940181 에 2020-09-20 04:06:14
nmw01223 It basically has the same functionality in terms of protocols supported - that is determined by the software level. Mine did not come with latest updates, the first thing I had to do was update it.
2020-09-21 02:04:56 도움이되는 (0)대답 (3)
nmw01223
03/01/2020
로 질문하기 spletko 에 2020-06-26 07:26:22
nmw01223 + and - are isolated from from the yellow ground in the middle.
2020-06-26 08:56:42 도움이되는 (0)대답 (4)
Q: is this recommended guard for a *****kv 3" prop?
로 질문하기 BG102522443 에 2020-06-15 01:20:16
nmw01223 Works for me on a 1306 3" prop.
2020-06-15 11:05:46 도움이되는 (0)대답 (1)
Q: will this fit 11xx motors with 3in props ? thx
로 질문하기 Danaperez 에 2020-06-08 08:46:51
nmw01223 Since an 11xx motor is not very tall, the props may not clear the guard.With a 1306 (15mm tall) the clearance is ~2-5mm. An 11xx is also a bit small for a 3" prop?
2020-06-08 03:29:35 도움이되는 (0)대답 (1)
Q: Is this good for R.C. Boats?
로 질문하기 BG084781557 에 2020-05-19 02:53:22
nmw01223 I would guess that unless geared down a lot, much too high RPM, much too low torque.
2020-05-19 11:37:35 도움이되는 (0)대답 (1)
nmw01223 How did you set up FPORT as described? The docs mention an 8 byte packet checksum that must be sent before RF receipt. Did you just put the correct 9 bytes in a file and copy it across using Betaflight serial passthru or a USB/TTL bridge, or is there some s/w tool for this?
lewiky
05/12/2019
4
댓글 (1)
Q: how to be procedure to switch PAL / Ntsc ???
로 질문하기 m.capasso.77@gmail.c 에 2019-10-10 07:38:38
nmw01223 Re answer from Ambrisial 5/11/19: Are you sure about that? I think the Betaflight OSD setting is to tell it what to expect from the camera, not to set it. Someone else said there is a button on the camera for this. Does not appear to be the case. I can find no way of setting this. The three connections are simply V , V- and video out.
2020-01-03 10:58:30 도움이되는 (0)대답 (3)
Q: Can anyone suggest a transmitter that is compatible with windows 10 and iphone?
로 질문하기 Mustafa Buğra Güz 에 2018-02-06 07:38:27
nmw01223 Ifyou mean VTx to transmit to the ROTG02, any 5.8GHz analogue video transmitter. If you mean can this be connected to W10, the answer is yes like any webcam, though I cannot recall the name of the app I used to view it.
2020-01-03 10:10:10 도움이되는 (0)대답 (2)
Q: What are the dimensions of the frame and propeller screws?
로 질문하기 mhmtsylr 에 2019-04-28 01:26:33
nmw01223 frame- Standard M2 screws, 4 equi-spaced on a 12mm circle. Propeller - same but 5mm circle.
2020-01-03 10:07:54 도움이되는 (0)대답 (1)
nmw01223
11/04/2018
nmw01223
11/04/2018
nmw01223 M2
2021-11-22 03:17:58 도움이되는 (1)