First of all there is no motor mount included. It's my first fixed wing and I don't have any motor mounts. It should be included or at least mentioned in the description. Looks like the kit was a bit upgraded. There are rectangular carbon rods on bottom of the wings for more rigidity and plywood on tips of the wings for better winglets adhesion.

First of all there is no motor mount included. It's my first fixed wing and I don't have any motor mounts. It should be included or at least mentioned in the description. Looks like the kit was a bit upgraded. There are rectangular carbon rods on bottom of the wings for more rigidity and plywood on tips of the wings for better winglets adhesion.

First of all there is no motor mount included. It's my first fixed wing and I don't have any motor mounts. It should be included or at least mentioned in the description. Looks like the kit was a bit upgraded. There are rectangular carbon rods on bottom of the wings for more rigidity and plywood on tips of the wings for better winglets adhesion.

I wanted a breakdown wing that could fit in a backpack or suitcase for travel. Want to get some flying in while on vacation. I added some rare earth magnets to the winglets. So bond strong but still can be removed. Laminated the wings. Should be a good traveler!

I wanted a breakdown wing that could fit in a backpack or suitcase for travel. Want to get some flying in while on vacation. I added some rare earth magnets to the winglets. So bond strong but still can be removed. Laminated the wings. Should be a good traveler!

I wanted a breakdown wing that could fit in a backpack or suitcase for travel. Want to get some flying in while on vacation. I added some rare earth magnets to the winglets. So bond strong but still can be removed. Laminated the wings. Should be a good traveler!

good wing but its heavy. had a hard time launching at first but got it doqn now. if only it were a little lighter

good wing but its heavy. had a hard time launching at first but got it doqn now. if only it were a little lighter

good wing but its heavy. had a hard time launching at first but got it doqn now. if only it were a little lighter

Kit: All parts there, no issues, comes well packaged Build: Simple enough, would of been nice to see some servo wire channels in the wing. Had to check all bolts on the frame, as quite a few were loose! Simple design, some tolerances were off, so things didn't sit too flush but could just about get it into position. Motor plate was well off making it quite difficult to get the xplate on. Plenty of room inside the frame which makes it easy for placing and arranging gear. Swapping out components etc. Flying: At first wasn't too impressed on 3s. it wasn't nippy, and didn't handle too great. too much elevator was causing tipstalls. Although it did recover really well from these, was just a little unpleasant. However it flew, it landed, without any issues. I upped it to 4s, and it come alive a little more, has some nice speed, doesn't overheat and the frame handles it well. I strapped an FPV setup to it, using the RunCam2 as the main video out. Unfortunately it was a little wobbly, im not sure if this was the mounting for the camera or the airframe. However it was fun and easy to fly. Could do with some more stability as it was difficult to judge some gaps. This has gone from the sell pile, to now me wanting a few more flights with it. Overall, i think i could do with some improvements. But its a good all rounder for FPV. One of the benefits is the carbon frame, does a good job of taking a rough landing.

Kit: All parts there, no issues, comes well packaged Build: Simple enough, would of been nice to see some servo wire channels in the wing. Had to check all bolts on the frame, as quite a few were loose! Simple design, some tolerances were off, so things didn't sit too flush but could just about get it into position. Motor plate was well off making it quite difficult to get the xplate on. Plenty of room inside the frame which makes it easy for placing and arranging gear. Swapping out components etc. Flying: At first wasn't too impressed on 3s. it wasn't nippy, and didn't handle too great. too much elevator was causing tipstalls. Although it did recover really well from these, was just a little unpleasant. However it flew, it landed, without any issues. I upped it to 4s, and it come alive a little more, has some nice speed, doesn't overheat and the frame handles it well. I strapped an FPV setup to it, using the RunCam2 as the main video out. Unfortunately it was a little wobbly, im not sure if this was the mounting for the camera or the airframe. However it was fun and easy to fly. Could do with some more stability as it was difficult to judge some gaps. This has gone from the sell pile, to now me wanting a few more flights with it. Overall, i think i could do with some improvements. But its a good all rounder for FPV. One of the benefits is the carbon frame, does a good job of taking a rough landing.

Kit: All parts there, no issues, comes well packaged Build: Simple enough, would of been nice to see some servo wire channels in the wing. Had to check all bolts on the frame, as quite a few were loose! Simple design, some tolerances were off, so things didn't sit too flush but could just about get it into position. Motor plate was well off making it quite difficult to get the xplate on. Plenty of room inside the frame which makes it easy for placing and arranging gear. Swapping out components etc. Flying: At first wasn't too impressed on 3s. it wasn't nippy, and didn't handle too great. too much elevator was causing tipstalls. Although it did recover really well from these, was just a little unpleasant. However it flew, it landed, without any issues. I upped it to 4s, and it come alive a little more, has some nice speed, doesn't overheat and the frame handles it well. I strapped an FPV setup to it, using the RunCam2 as the main video out. Unfortunately it was a little wobbly, im not sure if this was the mounting for the camera or the airframe. However it was fun and easy to fly. Could do with some more stability as it was difficult to judge some gaps. This has gone from the sell pile, to now me wanting a few more flights with it. Overall, i think i could do with some improvements. But its a good all rounder for FPV. One of the benefits is the carbon frame, does a good job of taking a rough landing.