phulson
私のコンテンツ
すべてのメッセージ
レビュー
コメント
回答
質問

すべてのメッセージ

phulson 03/09/2020
This plane is indestructible. I've crashed it over 20 times - the worst of which was when it hit a concrete wall, tumbled over it and almost flew into the sea. I just had to wipe it down before the next flight. I've also crashed it straight into the ground at 30mph+. I only had to reconnect the esc and then I could fly it again. It's the perfect plane for a first time flyer. Although a lot of people recommend a bixler (or skysurfer), this plane is much more durable. Batteries are cheap for it too. A 2200mah lipo 10-20C only costs £10.
爬虫類S800 V2スカイシャドウ820mmウィングスパングレーFPV EPPフライングウィングレーサーRC飛行機キット
US$65.99 US$79.19
2
推奨事項
コメント (0)
phulson 23/12/2020
I like the way they have 14 magnets inside, instead of three usual 12; it makes them so much smoother than normal. The quality is also excellent. The windings are neat and the bearings aren't notchy at all I'll definitely buy some of the 6s versions and make a super fast beast!
Brotherhobby VY 1507 1550KV 3100KV 6S / 1900KV 4150KV 4S ブラシレスモーター（RCドローンFPVレーシング用）
US$21.99 US$26.99
1
推奨事項
コメント (1)
phulson 23/12/2020
A very light frame! I particularly like how the top plate extends over the entire drone - it protects the electrical components much more. The carbon doesn't seem quite as strong as the more expensive frames, but it's still very good. I'd definitely use this frame again.
VX145 145mmホイールベース3mmアーム厚カーボンファイバー3インチフレームキット（RC FPVレーシングドローン用）
US$22.99 US$27.99
1
推奨事項
コメント (0)
phulson 23/12/2020
this is the first pre built drone that I bought. it's all put together well, but here's what I've learnt: 1). some of these drones have the wrong vtx settings loaded into betaflight. before your first flight, do a small range check on the fpv feed. if you don't get much distance, reload the vtx table for a mini forward vtx. the vtx was changed at some point to a more powerful one, but the software was never updated. 2). the performance is incredible. this drone is more agile, accelerates faster, and had a longer flight time than my 5 inch (more on this later). in fact, this drone has put me off flying 5 inch drones altogether. I tend to only fly 3 inch drones now. 3). I get 6 minutes of flight time on an 850mah 4s battery. why is no one taking about this??? I'm not flying slowly either; I'm going flips and rolls and gunning it the entire time. my 5 inch only gets 3 minutes and it's slower. 4). the camera is fantastic. I can't go back to any other camera now 5). the only setting that has been changed in the pids is the p yaw value (other settings like anti gravity have been changed, so make a note of those numbers in case you lose them). this means that you can still need with the PID values of you want. this is a great drone for both beginners and experts. it really surprised me with how capable it is. I've already ordered another frame to make my own one.
HGLRC Arrow 3 152mm F4 OSD 3 Inch 4S 6SFPVレーシングドローンPNBPNF w / 35A ESC Caddx Ratel1200TVLカメラ
US$174.99 US$209.99
6
推奨事項
コメント (1)
phulson 23/12/2020
if you're on this page, you've probably used them already. you can use these in sbus setup (which is how i've used them in the past) or you can flash different firmware from the frsky website and use fport. I'm using fport now, and the telemetry is so useful! also, I had a drone explode into a big fireball and only the rxsr receiver survived. I suppose that tells you something about it's durability. I have about 10 in a box somewhere. they're great receivers.
FrSky R-XSRウルトラSBUS/CPPM D16 16CHミニ冗長受信機 1.5g、RCマルチローターFPVレーシングドローン用
US$28.99 US$45.99
2
推奨事項
コメント (0)
phulson 23/12/2020
I used to use a very cheap £10 soldering iron and I wondered why I couldn't get a good join. this soldering iron has made things much easier! I can solder at a lower heat, and the job is much shinier (for some reason). I also like the on/off button so I don't need to unplug it inbetween preparing the wire. the digital temperature display is handy too.
Drillpro SD1 SD2 LCD 60W はんだ付けステーション プロフェッショナルPIDはんだ付けアイロンステーションツールキット 可変温度200-480°C ソルダーワイヤーホルダー付き はんだごてホルダー＆ドライバースロット
US$39.99 US$59.99
1
推奨事項
コメント (0)
phulson 23/12/2020
1200tvl, 3ms latency and only 2g. why buy any other camera?
FPVレーシングRCドローン用のCaddx Ant 1.8mm 1200TVL 16: 9/4: 3グローバルWDR、OSD 2gウルトラライトナノFPVカメラ
US$21.90 US$26.39
0
推奨事項
コメント (0)
phulson 23/12/2020
I have about 4 mamba f7 boards in different drones. they are all great quality and work very well. this one is different though. it has more features than normal! it has a usb-c port instead of a micro usb. this means that I can use my mobile phone cable to access my drone in the field. it also has a wireless function, but I haven't used that yet. this would be my go-to stack for 5 inch drones.
MAMBA F722S F7 BetaflightフライトコントローラーOSD 5 / 9V 2A BEC＆F50PRO 50A 3-6S Blheli_32 Dshot1200 FPVレーシングブラシレスESC（RCドローン用）
US$106.99 US$131.99
0
推奨事項
コメント (0)
phulson 23/12/2020
I bought these tips to use with my soldering iron. they don't oxidize quickly, and make a good join. I bought two packets!
DANIU 12個セット900M-Tシリーズはんだこて用先端
US$11.99 US$14.99
0
推奨事項
コメント (0)
phulson 23/12/2020
These models are so good that I have two now. They're absolutely indestructible and easy to fly. I'm only a beginner and, despite numerous crashes, I haven't had to send one to the scrapheap.
爬虫類S800 V2スカイシャドウ820mmウィングスパングレーFPV EPPフライングウィングレーサーRC飛行機キット
US$65.99 US$79.19
0
推奨事項
コメント (0)
phulson 20/08/2020
it works 100% of the time every time. mine is in my sonicmodell 900mm AR wing with an F411-wing flight controller.
Beitian BN-220T GPS GLONASSモジュール for APM Pixhawk CC3D Naze32 F3 F4フライトコントローラー RCドローン 飛行機
US$15.00 US$30.39
2
推奨事項
コメント (0)
phulson 27/10/2020
they fit my hglrc arrow. the arrow originally came with 3052 propellers, but these 3050 propellers are much cheaper. I'd like it if I could buy a single colour rather than a mixed bag. I like the yellow ones the most.
10ペアLDARC 3050 3x5 3インチPC 3ブレードプロペラ（RCドローンFPVレーシング用5mm取り付け穴付き）
US$9.99 US$11.99
0
推奨事項
コメント (0)
phulson 27/10/2020
very smooth motors. they fit the Avan propellers too.
GEPRC GR1206 3600KV 4500KV 6000KV 7500KV RCドローンFPVレーシング用2-4Sブラシレスモーター
US$19.99 US$23.99
0
推奨事項
コメント (0)
phulson 27/10/2020
a nice sturdy frame. no problems at all
AlfaRC AHX115 115mm ホイールベース 3mmアーム 3Kカーボンファイバーフレームキット RCドローンFPVレーシング用
US$15.99 US$19.99
0
推奨事項
コメント (0)
phulson 27/10/2020
fits my micro drone very well. the reception is good too.
RCドローン飛行機用2pcs Foxeerマイクロロリポップ5.8G 2.5DBi高利得オムニRHCP FPVアンテナ
US$19.99 US$28.79
0
推奨事項
コメント (0)
phulson 29/02/2020
As a newbie, I wouldn't consider flying a plane without Kopilot. It doesn't weight much, it's easy to set up and there's a lot of fun deciding where to put the GPS on the aircraft. It works flawlessly. So far i've bought two. As a note: if you buy Kopilot with the VC400 camera, it's £10 cheaper than if you bought Kopilot and the VC400 camera separately.
ZOHD Kopilot Liteオートパイロットシステムフライトコントローラー、GPSモジュール付きリターンホームスタビライゼーションジャイロ、FPV RC航空機固定翼用
US$53.50 US$62.39
2
推奨事項
コメント (0)
phulson 23/08/2020
although the jury is still out on whether soft mounting is necessary, I always soft mount my motors. I think that anything that reduces vibration to the flight controller can only be a good thing. these are much more professional than pvc tape. highly recommended!
10 PCSシリコン防振パッドイン22XX 23XXモーターRCマルチロータFPVレーシングドローン
US$4.44 US$4.69
0
推奨事項
コメント (0)
phulson 23/08/2020
they work fantastically on the babyhawk r pro 2.5. they're also really durable; I've crashed into bushes and trees and the propellers are still unscathed.
2ペア / 10パリエマックスAVANRush AVAN 2.5x1.9 2519 2.5インチ3枚プロペラTinyhawk IIフリースタイル/ Babyhawk R RCドローンFPVレーシングマルチローター用
US$6.99 US$8.99
0
推奨事項
コメント (0)
phulson 20/08/2020
By far one of the best 5 inch frames. it's very light (Andyrc used it in a hyperlite build) and it's also very strong; I've dropped mine onto concrete from 10m, and only a bolt needed replacing. The arms were fine.
HSKRC Foss 210 210mm ホイールベース 4mm アーム 3K カーボンファイバー 5 インチ フレームキット RC ドローン FPV レーシング用
US$13.99 US$21.99
0
推奨事項
コメント (0)
phulson 20/08/2020
mine is living happily in my drone. it's a good product, but it does get hot easily as others have mentioned. The MMCX connector on it is awful though - put some strong plastic glue around the connector or it will break in your first or second crash (i used epoxy to strengthen the connector, then coated it in normal glue, see pics).
Rcharlance F4 Pro V2 30.5x30.5mm Omnibus F4フライトコントローラー OSD BEC AIO 40CH 25/200/600/800mW VTX
US$51.99 US$62.99
0
推奨事項
コメント (0)

あなたは専門家です、あなたは助けることができますか？

招待メールを購読することを心から歓迎します！

購読すると、製品に関する質問に答えるために電子メールで招待されます。購読すると、「役立つバッジ」も獲得できます。プライバシー設定ページでいつでも登録を解除できます。

他の人を助け、幸せになりましょう！

  • 申し込む

バッジについて

バッジはコミュニティに関連しており、ユーザーは質の高いコンテンツを作成したり、ミッションを完了したり、特別なアクティビティに参加したりすることでバッジを獲得します。特定の人には独自の専用バッジもあります。
CEOバッジ

CEOバッジの所有者はバングッドのボス。

獲得できるバッジはまもなく提供されます
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe