frame muy robusto y compacto la cabina es muy pequeña y apenas se puede poner una cámara deportiva en el morro. los brazos del Wizard o el TCR 220 podrían servir de repuesto aunque hay que repasar un par de agujeros. el peso es bueno.

frame muy robusto y compacto la cabina es muy pequeña y apenas se puede poner una cámara deportiva en el morro. los brazos del Wizard o el TCR 220 podrían servir de repuesto aunque hay que repasar un par de agujeros. el peso es bueno.

frame muy robusto y compacto la cabina es muy pequeña y apenas se puede poner una cámara deportiva en el morro. los brazos del Wizard o el TCR 220 podrían servir de repuesto aunque hay que repasar un par de agujeros. el peso es bueno.

I ordered this frame last weak, because all my 3D printed or wooden frames exploded after each crash (and crash a lot). When I unboxed the package, I was excited about the quality of the parts, how well the fit together. The reason I choosed this one was because of the great protection for the FPV camera. All in all, I definitely can recommend this frame

I ordered this frame last weak, because all my 3D printed or wooden frames exploded after each crash (and crash a lot). When I unboxed the package, I was excited about the quality of the parts, how well the fit together. The reason I choosed this one was because of the great protection for the FPV camera. All in all, I definitely can recommend this frame

I ordered this frame last weak, because all my 3D printed or wooden frames exploded after each crash (and crash a lot). When I unboxed the package, I was excited about the quality of the parts, how well the fit together. The reason I choosed this one was because of the great protection for the FPV camera. All in all, I definitely can recommend this frame

So this frame on arrival was better than expected. For me the surprise was that it actualy had a name besides the "220mm Wheelbase 3K Carbon Fiber Racing Frame Kit 4mm Arm..." as described. It's called the Antelope 220 and it's a very decent frame. It arrived by DHL when i selected expedited shipping which was nice choice at a reasonable price. The frame came boxed wit instructions and sealed in mylar wrap. It came with all the included standard hardware including extra nuts and screws. I used this frame as a inexpensive replacement for my first FPV frame the Shendrone Tweaker. It looks to be a great replacement and I will fly it tomorrow. I just transferred the dead cat today and it went very smooth. My only two complaints which I will be reaching out to banggood on is that one of the bottom aluminum custom stand offs used for mounting the canopy to the bottom plate has a miss alinged screw hole which is completely unusable. The other side lines up okay and I am temporarily going to fly it like this for testing but, hopefully banggood can resolve this. Also the top plate to the canopy dose not physically attach to the canopy in any way. It's simply pressure fit to it. It's not a huge deal as the canopy is held together by the standoffs and then held down by the battery straps however it's a little bit jenky of a set up in my opinion. They could have grooved the carbon to fit together in a more solid fashion.

So this frame on arrival was better than expected. For me the surprise was that it actualy had a name besides the "220mm Wheelbase 3K Carbon Fiber Racing Frame Kit 4mm Arm..." as described. It's called the Antelope 220 and it's a very decent frame. It arrived by DHL when i selected expedited shipping which was nice choice at a reasonable price. The frame came boxed wit instructions and sealed in mylar wrap. It came with all the included standard hardware including extra nuts and screws. I used this frame as a inexpensive replacement for my first FPV frame the Shendrone Tweaker. It looks to be a great replacement and I will fly it tomorrow. I just transferred the dead cat today and it went very smooth. My only two complaints which I will be reaching out to banggood on is that one of the bottom aluminum custom stand offs used for mounting the canopy to the bottom plate has a miss alinged screw hole which is completely unusable. The other side lines up okay and I am temporarily going to fly it like this for testing but, hopefully banggood can resolve this. Also the top plate to the canopy dose not physically attach to the canopy in any way. It's simply pressure fit to it. It's not a huge deal as the canopy is held together by the standoffs and then held down by the battery straps however it's a little bit jenky of a set up in my opinion. They could have grooved the carbon to fit together in a more solid fashion.

So this frame on arrival was better than expected. For me the surprise was that it actualy had a name besides the "220mm Wheelbase 3K Carbon Fiber Racing Frame Kit 4mm Arm..." as described. It's called the Antelope 220 and it's a very decent frame. It arrived by DHL when i selected expedited shipping which was nice choice at a reasonable price. The frame came boxed wit instructions and sealed in mylar wrap. It came with all the included standard hardware including extra nuts and screws. I used this frame as a inexpensive replacement for my first FPV frame the Shendrone Tweaker. It looks to be a great replacement and I will fly it tomorrow. I just transferred the dead cat today and it went very smooth. My only two complaints which I will be reaching out to banggood on is that one of the bottom aluminum custom stand offs used for mounting the canopy to the bottom plate has a miss alinged screw hole which is completely unusable. The other side lines up okay and I am temporarily going to fly it like this for testing but, hopefully banggood can resolve this. Also the top plate to the canopy dose not physically attach to the canopy in any way. It's simply pressure fit to it. It's not a huge deal as the canopy is held together by the standoffs and then held down by the battery straps however it's a little bit jenky of a set up in my opinion. They could have grooved the carbon to fit together in a more solid fashion.

Sweet frame. Few minor things. Mine didn’t come with a PDB not sure if that was included or not I wasn’t going to use it anyway. If this is your first build please note that this frame is tight. The top plate is held by friction. I suggest a zip tie to really hold it down especially if you are mounting anything to the top plate. I used a 4in1 Afro esc as part of the stack it’s possible I could have had a kit more room in the body with 4 ESC’s in the arms and a small BEC AND PDB. I like the frame it’s quite rigid and for the money it’s way better than anything on HK. Changes I’d like to make: swap out to a flat FC the CC3D atom is taking up too much room. Smaller receiver the TGY IA6C I’m currently using might get good reception but it’s a space hog. Shout out to UAV futures for the idea on how to mount the antennae - small zip tie and shrink tubing make for a nice mount. I’m still deciding on a camera and VTX but size will be a factor. Compact batteries will also by key. Small form factor but room for some bigger motors people well worth a look. nice light but strong frame. parts: Cc3d atom Afro 4in1 20A esc King Kong 2206-2300KV motors TGY ia6c receiver Racecraft props.

Sweet frame. Few minor things. Mine didn’t come with a PDB not sure if that was included or not I wasn’t going to use it anyway. If this is your first build please note that this frame is tight. The top plate is held by friction. I suggest a zip tie to really hold it down especially if you are mounting anything to the top plate. I used a 4in1 Afro esc as part of the stack it’s possible I could have had a kit more room in the body with 4 ESC’s in the arms and a small BEC AND PDB. I like the frame it’s quite rigid and for the money it’s way better than anything on HK. Changes I’d like to make: swap out to a flat FC the CC3D atom is taking up too much room. Smaller receiver the TGY IA6C I’m currently using might get good reception but it’s a space hog. Shout out to UAV futures for the idea on how to mount the antennae - small zip tie and shrink tubing make for a nice mount. I’m still deciding on a camera and VTX but size will be a factor. Compact batteries will also by key. Small form factor but room for some bigger motors people well worth a look. nice light but strong frame. parts: Cc3d atom Afro 4in1 20A esc King Kong 2206-2300KV motors TGY ia6c receiver Racecraft props.

Sweet frame. Few minor things. Mine didn’t come with a PDB not sure if that was included or not I wasn’t going to use it anyway. If this is your first build please note that this frame is tight. The top plate is held by friction. I suggest a zip tie to really hold it down especially if you are mounting anything to the top plate. I used a 4in1 Afro esc as part of the stack it’s possible I could have had a kit more room in the body with 4 ESC’s in the arms and a small BEC AND PDB. I like the frame it’s quite rigid and for the money it’s way better than anything on HK. Changes I’d like to make: swap out to a flat FC the CC3D atom is taking up too much room. Smaller receiver the TGY IA6C I’m currently using might get good reception but it’s a space hog. Shout out to UAV futures for the idea on how to mount the antennae - small zip tie and shrink tubing make for a nice mount. I’m still deciding on a camera and VTX but size will be a factor. Compact batteries will also by key. Small form factor but room for some bigger motors people well worth a look. nice light but strong frame. parts: Cc3d atom Afro 4in1 20A esc King Kong 2206-2300KV motors TGY ia6c receiver Racecraft props.

i designed a mount for the axii antenna also buzzer holder with bg blue 12v side light led 😉 oh also hydrodipped in blueflames ✌

i designed a mount for the axii antenna also buzzer holder with bg blue 12v side light led 😉 oh also hydrodipped in blueflames ✌

i designed a mount for the axii antenna also buzzer holder with bg blue 12v side light led 😉 oh also hydrodipped in blueflames ✌

por fin el producto completo solo necesiyaba la pdb y me an mandado el frame completo da gusto comprar asi mil gracias

por fin el producto completo solo necesiyaba la pdb y me an mandado el frame completo da gusto comprar asi mil gracias

por fin el producto completo solo necesiyaba la pdb y me an mandado el frame completo da gusto comprar asi mil gracias

beginner flyer here so this thing is getting beat up pretty good! so far no signs of damage at all. a couple of things that could be improved is space for an FPV antenna and room for a gopro mount.

beginner flyer here so this thing is getting beat up pretty good! so far no signs of damage at all. a couple of things that could be improved is space for an FPV antenna and room for a gopro mount.

beginner flyer here so this thing is getting beat up pretty good! so far no signs of damage at all. a couple of things that could be improved is space for an FPV antenna and room for a gopro mount.

素晴らしい小さな220フレーム、私は今、2を持っている、最初の3年間続いた。 だから、別の交換のために別のを購入しました。 トリプルスタックで絞ることができました。 だから注意して、部屋のトンを持っていない。 技術も良かったが、部品はどんどん小さくなっているはずなので、問題ありません。 スターフレームまたはクレイジースピードにお勧めします。 タンクのようにクラッシュを処理します。

awesome little 220 frame, I now have two, first lasted 3 years. so bought another for replacements. was able to squeeze in triple stack. so just be mindful, dosnt have ton of room. tech was good then, but components should have gotten better and smaller now, so should be fine. recommend for starter frame or for crazy speed. handles crashes like a tank, few minor fixes.

素晴らしい小さな220フレーム、私は今、2を持っている、最初の3年間続いた。 だから、別の交換のために別のを購入しました。 トリプルスタックで絞ることができました。 だから注意して、部屋のトンを持っていない。 技術も良かったが、部品はどんどん小さくなっているはずなので、問題ありません。 スターフレームまたはクレイジースピードにお勧めします。 タンクのようにクラッシュを処理します。

素晴らしいフレーム! お金は本当に良い品質のために。 私の😂を圧倒しなかったことを願っています

Toller frame! Für das Geld echt gute Qualität. Hoffe ich habe meinen nicht übermotorisiert😂

素晴らしいフレーム! お金は本当に良い品質のために。 私の😂を圧倒しなかったことを願っています

it's light and I can't wait to finish it and it was well worth the money

it's light and I can't wait to finish it and it was well worth the money

it's light and I can't wait to finish it and it was well worth the money