JonDun
i miei contenuti
Tutti i messaggi
Recensioni
Commenti
risposta
Domande

Tutti i messaggi

JonDun 04/03/2021
They do a great job keeping the wife's knives sharp! To make life easier for me, I made a simple jig that keeps the sharpening angle to around 20 deg. The only problem with the sharpeners i noticed was that the 2000 grit was slightly concave otherwise I'm pretty happy with the purchase especially since I got them at 65% off during a promo.
Drillpro 5PCS Rivestito in titanio Diamante Knifes Sharpener 80/200/600/1000/2000 Grit Angle Sharpening Sharpen Stone Whetstone Bar with Base
US$12.99 US$21.99
8
raccomandazioni
Commento (0)
JonDun 15/04/2019
Highly recommended ! I liked it so much that I have now bought two. I am able to focus the laser to well below 1mm - see photos. My only complaint is that a cover should be provided for the exposed electronics but overall a great purchase and delivery was under 2 weeks. Thanks to Banggood. !!
Modulo di incisione laser da 450 nm e 5W con luce blu con modulazione TTL
US$109.99 US$199.90
1
raccomandazioni
Commento (0)
JonDun 21/03/2018
Great price. I'm using these as a reminder that my garage doors are open. Note that the black square part is plastic so it may not be suitable for the constant pounding of an assembly line but for my couple clicks a day its good value.
Excellway® 5pz Interruttore di fine corsa AC 250V 5A Leva Rotativa a Rulli Regolabile
US$17.99 US$25.99
1
raccomandazioni
Commento (0)
JonDun 04/03/2021
This is a very interesting device; I bought it to monitor dust levels in my home workshop and to measure if dust filters were being effective. With it i was able to significantly reduce dust to the point that my Indoor air quality now closely follows with local Outdoor air quality monitoring stations !! I added a wireless connection so it could be moved around and still log data to my shop PC. The only problem I encountered was that the supplied connector would not stay connected no matter how hard i tried to press it in. Eventually i hot glued the connector in place. Even with the connector problem i would still highly recommend this item.
PMS5003 PM2.5 Sensore di polvere di particelle d'aria Laser Modulo di uscita digitale Rilevazione di foschia ad alta precisione Dispositivo domestico intelligente
US$17.99 US$29.99
6
raccomandazioni
Commento (3)
JonDun 24/11/2020
Very Impressive ! Professionally vacuum packaged and a 2 week delivery to Canada. I really like the solid aluminum mounting bracket which made it easy to modify and mount to my home made CNC. Unlike other modules this laser is off until you press the test button. With careful focusing (I usually focus on a black razor blade using a head band magnifier from Banggood, laser goggles and PWM set at 1% power) the dot approached 0.1mm. Its very difficult to get a picture of the focused dot but i tried below. For my needs (wood engraving) it seems perfect and cuts through paper like butter at 30% power. I have not tried deep cutting wood yet but so far i'm very impressed with the quality of this laser compared to others i've purchased. I'll update in comments if i run into any problems with it over time. Thanks to Banggood for providing a great product at a great price !
Set di 8 pezzi NEJE 30W Modulo laser 2 in 1 Lente di messa a fuoco variabile regolabile e laser modificato a fuoco fisso con assistenza all'aria per macchina incisore laser, taglierina laser, stampante 3D, fresatrice CNC
US$116.99 US$233.98
14
raccomandazioni
Commento (2)

JonDun Anincredibly useful review

BigMac 04/03/2021
These aluminium alloy rods, have a flux core, and will brass aluminium, copper, and steel (dissimilar metals) to self or each other. They are mostly useful for crack repairs in aluminium castings, to prevent the crack progressing (drill a tiny hole first just beyond end of crack),*and to stop gas or fluid leakage. Offer price was a no- brainer purchase. Already I used a rod to seal a crack from weeping oil. Must have surfaces scrupulously cleaned using denatured alcohol, brand cleaner, cellulose thinners or similar. Clean crack and surrounding area thoroughly. Be careful because rods melt at very close to the base alloy of casting in some cases. Don't be too fierce with gas torch. Butane is enough heat, but you can use propane mix,for MAPP gas. Acetylene is NOT required. Remember you are BRAZING, and not Welding !
20Pz Bastoncini di saldatura in alluminio 1.6 / 2MM a basse temperature. Filo di saldatura con anima, non serve la saldatura in polvere. Bundle con scatola di conservazione.
US$12.35 US$16.00
8
Commento (1)
JonDun 04/03/2021
A useful and compact PSU
Modulo di alimentazione commutabile Geekcreit® AC 100-240V a DC 12V 5A 60W Adattatore driver per striscia LED
US$4.99 US$11.99
0
raccomandazioni
Commento (0)
JonDun 04/03/2021
VERY comfortable and VERY effective. Unfortunately the rubber part fell off after 3 weeks of use however i have ordered 2 more with hope that they will last longer. If the manufacture could ensure the rubber part stays on better, or advise on how it can be re-attached, it would easily get 5 out of 5 stars.
1 paio di punte borsite protettore raddrizzatore separatore correttore alluce valgo cura
US$14.99 US$17.99
0
raccomandazioni
Commento (0)
Wifi ezSHARE adattatore wireless Micro SD con classe ld 16gb scheda di memoria 10 microssd
US$25.57

D: Can you upload (eg write) files back to this sd card via WIFI ?

Domandata da JonDun il 2018-01-29 01:49:59

JOSE_IRIO Cartomuito bom.

2021-02-20 07:01:53 Utile (0)
Consegnare
risposta (1)
JonDun 31/01/2021
I used these caps to replace the original wax block caps in my vintage AR-5 speakers. They have worked wonderfully ! Thanks to supplier and Banggood for a great product and price.
Condensatore di marcia del motore della pompa dell'acqua CBB60 80UF 450 V.
US$9.99 US$11.99
0
raccomandazioni
Commento (0)
JonDun 31/01/2021
I used these caps to replace the original wax block caps in my vintage AR-5 speakers. They have worked wonderfully !! Thanks to supplier and Banggood for a great product and price.
Condensatore di marcia del motore della pompa dell'acqua CBB60 25UF 450V
US$5.10 US$6.12
0
raccomandazioni
Commento (0)

JonDun@olmez67 Youcan supply PWM to vary power level using a TTL signal. It also supports PWM in the voltage range of DC3.3V-12V (See the specification table in the description)

JonDun 24/11/2020
Very Impressive ! Professionally vacuum packaged and a 2 week delivery to Canada. I really like the solid aluminum mounting bracket which made it easy to modify and mount to my home made CNC. Unlike other modules this laser is off until you press the test button. With careful focusing (I usually focus on a black razor blade using a head band magnifier from Banggood, laser goggles and PWM set at 1% power) the dot approached 0.1mm. Its very difficult to get a picture of the focused dot but i tried below. For my needs (wood engraving) it seems perfect and cuts through paper like butter at 30% power. I have not tried deep cutting wood yet but so far i'm very impressed with the quality of this laser compared to others i've purchased. I'll update in comments if i run into any problems with it over time. Thanks to Banggood for providing a great product at a great price !
Set di 8 pezzi NEJE 30W Modulo laser 2 in 1 Lente di messa a fuoco variabile regolabile e laser modificato a fuoco fisso con assistenza all'aria per macchina incisore laser, taglierina laser, stampante 3D, fresatrice CNC
US$116.99 US$233.98
14
Commento (2)
JonDun 22/03/2018
A useful bit for my cnc.
Punta Affilata di Fresa CNC per Incisione Scanalatura V Codolo di 6mm
US$7.99 US$9.99
2
raccomandazioni
Commento (0)
JonDun 03/03/2019
Given that this is a fairly expensive piece of equipment some documentation and a cover to protect the exposed electronics should have been included. Now the good news: With careful focusing (I use a headband magnifier from Banggood, laser goggles and power at 1%) I can get cuts about 0.2mm wide in wood !! When unfocused the beam becomes rectangular. This is my first laser and I bought it to do wood engraving on my 2mx3m homemade cnc. It seems perfect for this application. I have not tried cutting but it slices through paper at 30% power like butter. Note that the laser is at full power when first plugged in so PWM is important to have. It was delivered in under 2 weeks to Canada and I'm very happy with purchase - Thanks Banggood ! :-)
Modulo di incisione laser da 450 nm e 5W con luce blu con modulazione TTL
US$109.99 US$199.90
10
raccomandazioni
Commento (4)

JonDun@popadrian23 I used a small piece of aluminum channel to hold the laser module and a piece of flat aluminum bolted to the channel to hold the electronics. The flat aluminum piece can be seen in the last picture between the module and electronics. I've been using the laser for a year now and remain VERY impressed with it. Good luck :-)

JonDun 03/03/2019
Given that this is a fairly expensive piece of equipment some documentation and a cover to protect the exposed electronics should have been included. Now the good news: With careful focusing (I use a headband magnifier from Banggood, laser goggles and power at 1%) I can get cuts about 0.2mm wide in wood !! When unfocused the beam becomes rectangular. This is my first laser and I bought it to do wood engraving on my 2mx3m homemade cnc. It seems perfect for this application. I have not tried cutting but it slices through paper at 30% power like butter. Note that the laser is at full power when first plugged in so PWM is important to have. It was delivered in under 2 weeks to Canada and I'm very happy with purchase - Thanks Banggood ! :-)
Modulo di incisione laser da 450 nm e 5W con luce blu con modulazione TTL
US$109.99 US$199.90
10
Commento (4)
JonDun 26/01/2018
I bought 2. Good image quality, nice metal enclosure and I can confirm they work below -20C. But, config software is very poor. For example, simply changing frame rates would crash the IE config software and lock me out from connecting again. No support for SD Card recording or remote pan, tilt, zoom even though the supplied software has these parameters. I ended up using wired LAN because I did not want the cameras impacting other WIFI devices. It took a lot of hours getting these cameras setup how I wanted. Overall they have been working well outdoors in cold conditions since Nov 2017 so I`m happy with the purchase.
ESCAM 2MP 1080p IP WiFi esterna impermeabile QD800WIFI telecamera dome IP66 ONVIF IR Videocamera per visione notturna P2P velocità
US$61.82 US$74.19
1
raccomandazioni
Commento (0)
JonDun 03/03/2019
OK but there were sharp edges from the lens on the nose piece. It was fairly easy to filed this down so that they could be comfortable to wear for long periods.
EleksMaker® Occhiali di Sicurezza Blu-violetta Laser Occhiali Protettivi
US$7.99 US$9.99
0
raccomandazioni
Commento (0)
JonDun 08/09/2018
These are high quality PCB's.. Recommended
Geekcreit® 40pcs FR-4 PCB Prototipo su Doppio Lato a Passo 2.54mm
US$5.99 US$15.99
0
raccomandazioni
Commento (0)

JonDun The description says Input voltage (eg Vcc) is DC12V. and Vout is 5V.Maybe that helps?

Dieter Haude 31/07/2018
Today i planned to start working with the HFS-DC06 Module. Unfortunately it does not work at all after applying the Vcc of 5 VDC. How can it happen to ship untested electronics? Please send me an replacement module as soon as possible.
HFS-DC06 Modulo sensore radar a microonde da 5,8 GHz DC 5V Rilevamento banda d'onda ISM 12M
US$12.99 US$15.99
0
Commento (2)
JonDun 03/09/2018
These leads seemed to work ok until the small end cap came off and stuck INSIDE the connector of my DVM . This prevented the DVM from working since NO leads would now make contact. If the end cap had just fallen off in my hands I would have given 3/5 stars but this defect completely disabled my DVM from working when i needed it so it gets 1/5 stars. BTW, I'll be pulling off the other end cap before it comes off and jams up another connector.
12 in 1 Sonda Sostituibile per Super Multi-Misuratore Sonda per Test Pinza con Clip a Coccodrillo
US$11.08
0
raccomandazioni
Commento (1)

Sei l'esperto, puoi aiutare?

Ti invitiamo sinceramente a iscriverti all'e-mail di risposta all'invito!

Se ti iscrivi, ti inviteremo via e-mail a rispondere alle domande che le persone hanno sui prodotti. Iscrivendoti] guadagnerai anche il "Badge utile "! Puoi annullare l'iscrizione in qualsiasi momento nella pagina delle impostazioni sulla privacy.

Aiuta gli altri e sii più felice!

  • sottoscrivi

Informazioni sui badge

I badge sono collegati alla community e gli utenti guadagnano badge creando contenuti di qualità, completando missioni o partecipando ad attività speciali. Le persone specifiche avranno anche il proprio badge esclusivo.
Badge CEO

il badge ceo è di proprietà solo del boss di banggood.

I badge che puoi guadagnare arriveranno presto
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe