Tutti i messaggi

D: What is the function of pushbutton S1?

Domandata da spaco il 2019-08-30 04:16:07

Roger The pushbutton is the main ON / OFF switch. It cuts the input (jack plug) from the 3 outputs.

2019-08-31 02:08:15 Utile (0)
Invio
risposta (1)

D: Do you also have Cool White?

Domandata da kam1787 il 2019-08-28 08:54:22

Roger https://www.banggood.com/High-Power-3W-LED-DIY-Light-Bead-Lamp-Chip-Blue-Red-Green-Warm-White-Yellow-p-1024180.html?rmmds=search

2019-08-30 01:56:28 Utile (0)
Invio
risposta (2)

Roger Youmay use to receivers of 4 channels with only one remote (if you paire them), but on each receiver the first channel will be ON when you push button 1 of the remote, and so on. It has not much sense.

2019-08-15 02:57:58 Utile (0)
Invio
risposta (1)

D: Vt means what

Domandata da kalaiselvanmani il 2019-08-14 01:32:53

Roger TheVT pin is the validation pin, to make sure the received signal is coming from the paired remote. You can just wire it to high.

2019-08-15 02:55:50 Utile (0)
Invio
risposta (1)

D: The Whiter From the rgb is neutral/normal one?

Domandata da gabriel_wender il 2019-08-13 10:49:18

Roger Youhave the choice between RGB, or Warm white, or neutral white (less yellowish than the warm white). This are 3 different strips.

2019-08-15 02:52:28 Utile (0)
Invio
risposta (1)

Roger That'snot normal. 3 possibilities : First, your module is effective. Second, you need to pair the remotes from new. Third, a neighbour is using something with same frequency (may baby survey tool)

2019-08-05 05:08:14 Utile (0)
Invio
risposta (1)

D: Is it suitablefor windows7?

Domandata da om meena il 2019-07-15 11:27:11

Roger Theoperating system doesn't influence.

2019-07-24 04:43:27 Utile (0)
Invio
risposta (1)

Roger onceyou don't use it in the way the manufacturer build it, it's at your own risks. You have to see how the segments are powered.

2019-07-24 04:42:29 Utile (0)
Invio
risposta (1)

D: Will it work with 9v?

Domandata da omerss il 2019-07-23 12:21:03

Roger Yes,but it will not be bright enough, because the small resistors are calculated for 12V

2019-07-24 04:39:49 Utile (0)
Invio
risposta (1)