ATOMRC Dolphin V1.1 Fly Wing 845mm Wingspan EPP FPV Aircraft RC Airplane KIT/PNP/FPV
A part of the review has been auto-translated.
Don't bother buying the PNP version with the motor, esc and servos. The ESC is junk and the servos are cheap plastic-gear type. Otherwise the airframe is really good and this plane flies great. I used a 6s battery, 1800mah, and a 2200 kv motor with a 70a ESC. With this setup the plane is radical, unlimited vertical with 120+ mph speed.
Love the kit! Very stable flight. Only stock electronics were packed a bit too tight and bundled, causing some wires to kink. Other than that all good.
this is the most sexiest plane in the world built for aerodynamics can't wait to try it out
Sehr schönes Modell, passgenauer und umfangreicher Bausatz mit guten Flugeigenschaften. Robust noch dazu ! Einige Teile auf den Bildern sind nicht original sondern 3d gedruckt. Kann das Modell uneingeschränkt weiterempfehlen 👍
very nice aviator, visually very appealing! I am very happy with it.
Came with a different motor and prop than what was purchased:
great looking plane. servos are plastic. esc very light? thx and camera very small. looks like a slow flying low amp setup out the box fpv. would use this stuff for high amps
It arrived from the warehouse in Madrid in three days. It's not pnp. Everything you need to mount it comes with the exception of the battery connector. You have to weld the speed shifter. From the speed control do not send their instructions I've installed another 30Amp to brake the engine. The plane flies beautifully and is very well finished. 6/7 min with 4s and 2200mAmp with a consumption about 14Amp and 200 w with the engine and propeller supplied in the kit. The cdg is marked on the wings and is correct. I catapult it perfectly: by hand half the time I crash it.
The product is very good! It is made of quality parts. It has many accessories. I recommend it to others.
shipped fast wasn’t expecting it for another week. well packed and no damage. looking forward to flying it.