This module is thinner than the usual. Standard I2C address is 0x20. It is not immediately visible, but A0,A1,A2 are physically connected to low. So to set up a different address you have to cut the connection, and solder desired pin to high. Also it is using nonstandard addresses, so instead of the original liquidcrystal i2c library you have to use this: https://github.com/t3chguy/LiquidCrystal_I2C_GY

This module is thinner than the usual. Standard I2C address is 0x20. It is not immediately visible, but A0,A1,A2 are physically connected to low. So to set up a different address you have to cut the connection, and solder desired pin to high. Also it is using nonstandard addresses, so instead of the original liquidcrystal i2c library you have to use this: https://github.com/t3chguy/LiquidCrystal_I2C_GY

This module is thinner than the usual. Standard I2C address is 0x20. It is not immediately visible, but A0,A1,A2 are physically connected to low. So to set up a different address you have to cut the connection, and solder desired pin to high. Also it is using nonstandard addresses, so instead of the original liquidcrystal i2c library you have to use this: https://github.com/t3chguy/LiquidCrystal_I2C_GY

bel prodotto

nice product

bel prodotto

Nice tiny useful

Nice tiny useful

Nice tiny useful

I had few LCD and I was in need to spare some Arduino pins to use them for the I&C and i found this adapter as a good way of doing it. Like it and it worth the money i paid. Although, the adjustable trimmer might be a little bigger :)

I had few LCD and I was in need to spare some Arduino pins to use them for the I&C and i found this adapter as a good way of doing it. Like it and it worth the money i paid. Although, the adjustable trimmer might be a little bigger :)

I had few LCD and I was in need to spare some Arduino pins to use them for the I&C and i found this adapter as a good way of doing it. Like it and it worth the money i paid. Although, the adjustable trimmer might be a little bigger :)

Non ancora testato, ma guardare lo stesso come gli altri che ho usato

Not tested yet, but look the same as others I have used

Non ancora testato, ma guardare lo stesso come gli altri che ho usato

Spedizione veloce ed efficiente. Ordine ben imballato. Testeremo più tardi.

Fast and efficient shipping. Order well packed. Will test later.

Spedizione veloce ed efficiente. Ordine ben imballato. Testeremo più tardi.

The I2C interface for LCD is ok

The I2C interface for LCD is ok

The I2C interface for LCD is ok

buona qualità!!

good quality!!

buona qualità!!

Modulo di bassa qualità e difficile da saldare. Non consiglio questo modello. Si rompe troppo facilmente e se sta saldando rovina anche l'altro modulo.

Módulo de baja calidad y difícil de soldar. No recomiendo este modelo. Se rompe con demasiadad facilidad y si es al soldar te arruina el otro módulo también.

Modulo di bassa qualità e difficile da saldare. Non consiglio questo modello. Si rompe troppo facilmente e se sta saldando rovina anche l'altro modulo.

good deal

good deal

good deal