सभी संदेश

क्यू: Does it support motor brake for fixed wing application? With factory FW.

द्वारा पूछा गया mike_o पर 2023-06-17 06:20:04

HazzahFPV Brake on stop: Brake on stop can be enabled or disabled. When enabled, brake will be applied when throttle is zero. For nonzero throttle, this setting has no effect.

2024-01-16 01:11:05 उपयोगी (0)
जमा करें
जवाब (1)

क्यू: Can you use separate inputs for each ESC?

द्वारा पूछा गया mike_o पर 2022-12-07 02:22:43

nathan2ba yes this one does along with daul 4.12. the red white and black wires you see on this board plug to your rx, directly across the board from those 3 wires you'll see 3holes that you'll need to solder your servo plug wires into and plug into 2nd channel on rx, remaining programing done thru vesc. tool. b careful vesc daul 6.6 plus does not support 2 channels

2023-02-11 04:15:36 उपयोगी (0)
जमा करें
जवाब (1)

क्यू: Can't get PPM input to work. Using RCIN and UART1 set to serialRX, I get nothing. Suggestions?

द्वारा पूछा गया mike_o पर 2018-03-27 03:29:32

masato If you want to use UART1, connect to Rx1

2021-09-22 03:31:57 उपयोगी (0)
जमा करें
जवाब (2)

क्यू: CZ warehouse, pls!

द्वारा पूछा गया mike_o पर 2021-02-09 01:05:41

Cardboar ok

2021-03-03 02:34:04 उपयोगी (0)
जमा करें
जवाब (1)

क्यू: LHD or RHDjQuery11130116585133091758_1610089788562?

द्वारा पूछा गया mike_o पर 2021-01-08 01:11:27

BG111144324 عزيزي البائع لا ترسل الطلب

2021-02-02 02:53:08 उपयोगी (0)
जमा करें
जवाब (1)

क्यू: Does it work with cuav pixhack v3?

द्वारा पूछा गया jaimer पर 2019-11-28 04:07:19

mike_o Yes, just set serial protocol to "10",

2021-02-01 05:32:13 उपयोगी (0)
जमा करें
जवाब (1)