सभी संदेश

क्यू: My switch randomly turns on and off. Is there a way to stop this?

द्वारा पूछा गया BG155642218 पर 2020-08-16 12:08:52

GRC71 Theremay be some interferences (including magnetic fields), or bad connectors. How do you power it? Using the power supply, or batteries. If you are using the second option, be sure the batteries are fully charged otherwise the relay lock itself, once the voltage it's too low.

2020-10-08 11:41:23 उपयोगी (0)
जमा करें
जवाब (1)

क्यू: cuál es la diferencia de 1,2 o 3 baterías?

द्वारा पूछा गया BG161644419 पर 2020-07-11 12:59:26

GRC71 You can fly the quadcopter for longer, changing the battery as soon as it runs out.

2020-07-12 03:43:55 उपयोगी (0)
जमा करें
जवाब (6)

क्यू: Can the double version work with 5V at 400mA? Not experienced with 2-6s meaning

द्वारा पूछा गया juliangliniecki पर 2020-04-08 04:19:29

GRC71 According to the specs, it won't work with 5V, as the minimum voltage you have to provide for the double strobes version, it's 7.4V (2S). 3S 11.1V 4S 14.8V 5S 18.5V 6S 22.2V

2020-04-20 08:48:52 उपयोगी (0)
जमा करें
जवाब (2)

क्यू: It is works in my car with 12 v battery?

द्वारा पूछा गया stamatis पर 2017-12-15 03:16:59

GRC71 You can use 12V ONLY with the version that uses 2 strobe lights.

2020-04-20 06:09:17 उपयोगी (0)
जमा करें
जवाब (4)

क्यू: How much volt is this?? 5v or 3.3v

द्वारा पूछा गया BG443717559 पर 2020-04-17 08:37:28

GRC71 To power the Arduino Nano you can to plug it to the USB of your PC-Laptop (5V) using the serial cable. You still have though, the option of powering it using the 5V pin, using a voltage regulator (voltage has to be accurate). If you use the Vin port, you can use up to 12V to power it, but this is the last efficient way, as you dissipate through heat the excess of voltage. Regarding the output you have also the 3.3V pin. I hope it's helpful.

2020-04-20 06:05:01 उपयोगी (0)
जमा करें
जवाब (5)