notyoung
notyoung Not mentioned in the one page manual.
2023-12-19 05:18:53 Utile (0)
notyoung Yes. It's switchable from C to F.
2023-12-19 05:18:18 Utile (0)Q: I want to weld an existing metal strip. What thickness can it weld?
demandé par BG416654423 sur 2023-03-08 11:42:03
notyoung Welding thickness: 0.1-0.15mm
2023-03-08 12:51:56 Utile (0)Q: Does it have an activity (read/write) indicator(s)?
demandé par BG513217491 sur 2022-12-07 08:36:42
notyoung Not that I noticed ;-) Just power.
2022-12-07 02:58:21 Utile (1)Q: what is the white wire for?
demandé par BG131214613 sur 2022-07-23 05:39:58
notyoung Red is positive power. Black is negative power. White goes to voltage to be read. Back of PCB has "Vin".
2022-07-24 09:42:29 Utile (2)
notyoung No. The two inputs are simply in parallel to allow using smaller wire from the solar panels. Be aware that the PowMr has limits on the lowest and highest solar panel voltages for a given battery bank, such as 20-80 volts solar for a 12 volt battery. Read the manual carefully and be very aware that the PowMr REQUIRES at least 20 volts solar input for a 12 volt battery. That means a single 100 watt panel will probably NOT work as the panel's under-load voltage will be in the range of 17-18 volts and that's not enough.
2022-06-17 03:52:11 Utile (1)Q: Good day. Can I test 1.5V,4V and 9V Batteries with this multimeter?
demandé par goldencosta sur 2021-06-09 06:20:03
notyoung You can measure the voltage of the batteries but that tells you very little about the battery's remaining capacity. For that, you need a battery tester which tests the battery under load.
2021-06-09 04:22:25 Utile (0)
notyoung No wattage ratings. The 4 models are rated in lumens: A=1000, B=1500, C=3000, D=4500. You can find charts of "lumens to incandescent watts" online.
2021-02-19 05:32:59 Utile (1)Q: Does the remote need batteries?
demandé par DSQUARED sur 2021-02-12 07:22:55
notyoung Yes.
2021-02-12 04:57:34 Utile (0)
notyoung The output current is determined by the chips used in the DC-DC converter. Using a larger battery will provide longer charging time but will NOT increase the output current.
2020-09-15 11:19:59 Utile (0)Q: Can I use with Lead-Acid battery?
demandé par witb sur 2020-08-07 12:45:23
notyoung You can use it with any type battery IF you set the voltage range correctly.
2020-08-07 01:17:04 Utile (1)
saijulie Thanks for your information to aware about SOLAR Panel
2019-11-06 08:24:24 Utile (11)
notyoung Soundsvery much like the older MakeSkyBlue firmware which didn't respond well to solar changes and sometimes not to steady solar power for hours - just taking the panels to their minimum voltage and not doing the MPPT check again. It seems programming an MPPT controller to truly track the solar input as something of an art and not understood by all who try.
Nous vous invitons sincèrement à vous abonner à l'e-mail d'invitation à répondre!
Si vous vous abonnez, nous vous inviterons par e-mail à répondre aux questions des gens sur les produits. En vous abonnant, vous gagnerez également le «Badge utile»! Vous pouvez vous désinscrire à tout moment sur la page des paramètres de confidentialité.
Aidez les autres et soyez plus heureux!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
