Meilleures offres pour HBX 16889A Voiture télécommandée brushless Pro

demandé par BG371814471 sur 2021-09-20 02:02:44

Rogerwilco Yes it does, but mine didn't work properly until I changed to a thicker oil.

2021-10-09 01:31:03 Utile

Soumettre

réponses (1)

Rogerwilco 09/02/2021

Nice multimeter that's decently accurate with a very nice display. However the readability of the main functions around the dial, especially the blue and red, is quite bad. In photos they look ok but not in reality. Still a nice meter with that amazing display but the price has gone up considerably and AU$53.50 is way too high in my opinion.

ANENG SZ18 9999 Compteurs professionnels True RMS Multimètre numérique analogique Testeur de transistor de sortie quadratique de capacité de transistor NCV

US$45.99 US$55.99

1

Commentaires (0)

Rogerwilco 19/03/2021

The 6 cob version is ok for the price and adequately bright, but no more than that. The sensitivity of the PIR sensor seems pretty low on mine and doesn't come on until you're directly under it. My similarly priced Aldi light is around the same brightness but it is more sensitive to movement, but doesn't look as stylist installed. How it fairs in the longer term is anyone's guess.

Lampe murale extérieure pour jardin avec détecteur de mouvement PIR et télécommande, alimentée par énergie solaire et LED COB

US$17.99 US$21.99

0

Commentaires (0)

MUSTOOL G1200 Microscope Numérique 12MP Grand Écran Couleur de 7 Pouces Grande Base Affichage LCD 1-1200X Continu

US$68.99 US$105.99

Q: The USB cable does not fit - seems the connector was installed upside down in the microscope: The cable connector would fit if the USB connector was installed with the broad side towards the screen. The rubber/plastic around the cable connector is too thick to be inserted with the broad side pointing away from the screen!

demandé par riteman sur 2020-02-17 06:06:38

Rogerwilco For anyone still having this issue. Yes the USB socket is poorly positioned (not installed upside down) making it almost impossible to plug the cable in. I had to trim away part of the USB plug to make it thinner and even then it was a tight fit. Do not try a USB C cable, that isn't the problem.

2021-02-09 08:18:43 Utile

Soumettre

réponses (3)

MUSTOOL G1200 Microscope Numérique 12MP Grand Écran Couleur de 7 Pouces Grande Base Affichage LCD 1-1200X Continu

US$68.99 US$105.99

Q: I asked about hte G1200 battery and Billy123 answered Hi , Larry , battery is 18650 , available from any vape shop , Amazon or Banggood , hope this helps , Billy Billys123 answered on September 25,2020 The 18650 battery is a AA AND IS IN NO WAY THE CORRECT BATTERY TYPE AS ITS A LI THIN PACK DESIGNED TO PLUG IN. WHY TRY TO LIE AS TO THE CORRECT BATTERY IF YOU DO NOT KNOW. I SUGGEST YOU OPEN ONE UP WITH THE BATTERY BEFORE GIVING OUT BAD INFO AND YOU HAVE NO WAY TO RESPOND TO YOUR ANSWER!!

demandé par BG511641317 sur 2020-09-25 04:26:10

Rogerwilco FYI, 18650 is in no way a AA.

2021-02-09 08:12:23 Utile (1)

Soumettre

réponses (5)

Rogerwilco 19/12/2020

Excellent torch for the price. Feels good in the hand and solid construction. Throws out a nice beam both at both ends of the zoom. Extra value with the included Li-Ion battery and the USB charging port plus the 4 nice blue status leds. Just make sure to remove the protective clear plastic covering the battery terminals. Very pleased with this torch.

BIKIGHT XHP50 1800lm Kit de Lampe de Poche Puissante à Zoom Longue Poutée avec Batterie Li-ion 18650 Rechargeable par USB et Affichage de Puissance, Mini Lampe de Poche à Focalisation Réglable, Lumière Tactique

US$9.94 US$19.99

1

Commentaires (0)

Rogerwilco 01/09/2020

I am very impressed with this charger. I've had a few different ones like the LaCrosse BC900 and BC700 but they would overcharge and made the batteries very hot. I also tried the SkyRC NC1500 which couldn't even read the battery voltages correctly. The Opus has performed perfectly and doesn't overcharge which was my main concern. Plus it has the extra options to discharge and test which comes in very handy. I highly recommend this charger if you only need AA/AAA charging.

Opus BT-C700 12V LCD Affichage 4slots AA AAA NiMH NiCd Rechargeable Batterie Chargeur

US$29.35 US$35.22

1

Commentaires (0)

Rogerwilco Did you remove the protective film?

craigbillybradley 12/06/2020

Good for the price , makes swapping from drone to drone very easy, did come with scratches on display but still happy .

RadioMaster TX8 / JumperTX T8SG 2.4G 12CH Hall Gimbal Open Source Multi-protocol Mode1 / 2 Transmitter pour RC Drone

US$81.99 US$98.99

0

Commentaires (1)

Rogerwilco Wow 15% out so why the 5 star rating?

BG103754316 27/11/2019

Received this multimeter on time in good physical condition. Upon initial testing, DC voltage ranges read appox 15% low. This multimeter is either defective or is way out of calibration. Emailed Bangood several times, no response. As of now I recommend do not buy this device and do not buy anything of significant value from the Bangood platform. I will amend this review if the situation is addressed by Bangood.

ET3240 Multimètre numérique de paillasse d'origine 22000 comptes avec multimètre de bureau haute précision à grand écran clair

US$225.99 US$271.99

6

Commentaires (2)

MYTEC 30W 110-240V Glue Gun Hot Melt Glue Gun Graft Repair Tools

US$9.99 US$11.99

Q: You say this is 30W but the item pictures show it's only 20W. Why?

demandé par Rogerwilco sur 2019-10-02 04:16:23

Vivi Pictures are wrong. It is 30W

2019-10-15 08:49:01 Utile

Soumettre

réponses (1)

Rogerwilco 29/12/2018

I bought this as a kit with no electrics as I had my own parts already. It arrived in Australia very quickly so I set about installing my parts but came across 2 issues nearly immediately. There don't seem to be enough screws supplied to complete the build. In particular the 4 servo mounting screws of which there are only 2 provided, and the identical motor mounting screws it seems are not supplied. I could be wrong but it's not very clear which screws are used for what so I was going by what I could work out with the poor diagram in the manual. What was worse than missing screws is that the servo saver came wound up as tight as possible and I couldn't loosen the adjusting screw even with it in a vice and using large pliers. I nearly ruined it in the process and have had to buy new parts as this can't perform the task it's designed for in it's current state. I did open a case with Banggood but as usual the information and photos provided never seem to be enough for them and I'm over jumping through their hoops.

JLB Racing CHEETAH 21101 ATR 1/10 4WD RC Truggy voiture sans balais sans pièces électroniques

US$220.99 US$293.99

3

Commentaires (0)

Rogerwilco From a review I saw I think for USB charging this works like a portable battery bank, so you need to remove the 12v external power plug and the USB port will then power on from the Li-Ion cell(s) you have inserted. It's not a replacement for a regular USB charger.

drgum 05/04/2018

Fast delivery; received in 10 days. Appearance looks good. Detailed user manual in English & Chinese included. Able to charge most kind of rechargeable batteries. However, there is something wrong with the USB output. It's just not working (as shown in photos attached). Will write to customer service to get help.

ADEASKA SQ4 Intelligent LCD Affichage USB Batterie Chargeur pour IMR/Li-ion Ni-MH/Ni-Cd/LiFePO4 Batterie

US$42.34 US$49.99

0

Commentaires (2)

Rogerwilco That didn't work for me. Mine seemed to work as follows. 3 wire connector on a8 starting with black wire on the outer pin and then the 2 wire connector on the signal pins with blue on a7 and green on a6. However I've never heard a sound from the buzzer.

Maxheadspace 19/05/2016

This board works great on the APM 2.6. The wiring directions on this site are all hosed up. What worked for me was to run the three-lead connector flat across the 5-6-7 SIGNAL pins, black-red-white, then put the two-wire (blue-green) connector vertical on O1 ground and voltage pins (vertical, as in perpendicular to the three-lead connector). I did not have to change the LED setting in my firmware at all. When I plugged it in and powered up the quadcopter it worked immediately with ARM and GPS lights flashing/locking just as they were supposed to. No software changes. Hope that helps!