Mini 3W COB LED Lamp Strip Light Bar Warm White/ White 300LM 10-11V
A part of the review has been auto-translated.
Great little cob (chip on board) light. 3W quite powerful , but back of it heats very much. You need to connect it to some heat pipe, or al heat sink .
Screwed them onto an aluminium bar with some heatsink compound between and they are now working perfectly in my rangehood above the stove. Thanks!
Diese LED mit max. 250mA betreiben und unbedingt auf Kühlblech schrauben da sie sonst in wenigen Sekunden vernichtet ist. Mit einen 10 bis 12 Ohm Widerstand in Serie kann es an 12 Volt betrieben werden. Vorteil dieser flachen Led ist das man sie leicht im Auto oder im Schrank auf schrauben kann und keine speziellen Halterungen benötigt.
Bardzo jasne LED. Idealne do oświetlenia drona. Widoczne nawet w dzień z dużej odległości. Nie polecam zasilać ich napięciem większym niż 9V. Bardzo się grzeją i mogą się przepalić.
This is such a bright light (Cool White), and so lightweight too... Great for RC Night Flying.... I have strips of LED's inside the plane wings and fuselage to illuminate through the foam and provide orientation (different colours), and have started to experiment with these on the underside to assist in landings in the dark... On an 11.1 volt LiPo battery these are fantastically bright, and so far no issues with getting too hot, etc. Just be warned.. Don't test them too close up, or you'll be seeing purple blotches for a few minutes (like I did!) :)
Produit conforme et bien emballé
tres bon produit ne chauffe pas trop si utilise avec la tension indiquee
Schnelle Lieferung. Gute Qualität. Schöne flache Bauweise.
В авто, багажник пойдет.
THe led was plugged to 11.5v Lipo and after 10sec stopped working. Dont recommend the item at all.