Perfeito...vem com 3 pares de pinos diferentes. Muito bom.

Perfeito...vem com 3 pares de pinos diferentes. Muito bom.

Perfeito...vem com 3 pares de pinos diferentes. Muito bom.

I was able to get this to work with my Wemos D1 minis *after* I added a pull-down resistor (1k or 2.2k or 10k, etc) to D8 (GPIO15/SS). If you don't do this, then the D1 mini won't boot. https://wiki.wemos.cc/products:d1:d1_mini But the fix is simple -- just solder a pull-down resistor between D8 and Gnd. I've included a picture of one of the boards I modified (the soldering job is really a hack -- it was just a proof-of-concept; I'm probably going to try to use a surface mount resistor in the end).

I was able to get this to work with my Wemos D1 minis *after* I added a pull-down resistor (1k or 2.2k or 10k, etc) to D8 (GPIO15/SS). If you don't do this, then the D1 mini won't boot. https://wiki.wemos.cc/products:d1:d1_mini But the fix is simple -- just solder a pull-down resistor between D8 and Gnd. I've included a picture of one of the boards I modified (the soldering job is really a hack -- it was just a proof-of-concept; I'm probably going to try to use a surface mount resistor in the end).

I was able to get this to work with my Wemos D1 minis *after* I added a pull-down resistor (1k or 2.2k or 10k, etc) to D8 (GPIO15/SS). If you don't do this, then the D1 mini won't boot. https://wiki.wemos.cc/products:d1:d1_mini But the fix is simple -- just solder a pull-down resistor between D8 and Gnd. I've included a picture of one of the boards I modified (the soldering job is really a hack -- it was just a proof-of-concept; I'm probably going to try to use a surface mount resistor in the end).

Nette Ergänzung zu meinem D1 mini

Nice addition to my D1 mini

Nette Ergänzung zu meinem D1 mini

antistatic package. looks good.

antistatic package. looks good.

antistatic package. looks good.

Artikel wie beschrieben.

Item as described.

Artikel wie beschrieben.

eine kleine Sache, aber funktioniert ok

a little thing but works ok

eine kleine Sache, aber funktioniert ok

This d1 mini shield was the last one I needed to complete the kit I put together. As with all the other ones I had previously purchased,I soldered it up and it worked like I new it would. 👍

This d1 mini shield was the last one I needed to complete the kit I put together. As with all the other ones I had previously purchased,I soldered it up and it worked like I new it would. 👍

This d1 mini shield was the last one I needed to complete the kit I put together. As with all the other ones I had previously purchased,I soldered it up and it worked like I new it would. 👍

thx

thx

thx

Well packaged and excellent delivery time (9 calendar days from order). A Micro SD card is a great way of adding a data logging capability to any MCU project. I am happy to recommend these items.

Well packaged and excellent delivery time (9 calendar days from order). A Micro SD card is a great way of adding a data logging capability to any MCU project. I am happy to recommend these items.

Well packaged and excellent delivery time (9 calendar days from order). A Micro SD card is a great way of adding a data logging capability to any MCU project. I am happy to recommend these items.

noch nicht verwendet, sieht aber gut aus.

haven't used yet, but looks good. No information included.

noch nicht verwendet, sieht aber gut aus.