2 weeks to be on my hands, fast shipping, very well packaged. The drone flies really well, perfect for indoors and can also handle moderate wind. I crashed it several times and it flies just as good it flew when I connected the first battery to it. 450mah lasts for about 4 and half minutes, no acro movements. Inches 650mah battery lasts for about 5 and half minutes, again, no acro movements.

2 weeks to be on my hands, fast shipping, very well packaged. The drone flies really well, perfect for indoors and can also handle moderate wind. I crashed it several times and it flies just as good it flew when I connected the first battery to it. 450mah lasts for about 4 and half minutes, no acro movements. Inches 650mah battery lasts for about 5 and half minutes, again, no acro movements.

2 weeks to be on my hands, fast shipping, very well packaged. The drone flies really well, perfect for indoors and can also handle moderate wind. I crashed it several times and it flies just as good it flew when I connected the first battery to it. 450mah lasts for about 4 and half minutes, no acro movements. Inches 650mah battery lasts for about 5 and half minutes, again, no acro movements.

Best whoop I've flown, nippy and long flight times... modded with a uz80 frame for better durability and fight characteristics...19.5 grams on new frame

Best whoop I've flown, nippy and long flight times... modded with a uz80 frame for better durability and fight characteristics...19.5 grams on new frame

Best whoop I've flown, nippy and long flight times... modded with a uz80 frame for better durability and fight characteristics...19.5 grams on new frame

Quadcopter Moblite7 liked its simplicity, minimum details, good motors, light weight. But a lot of things had to be changed, but it applies to flying around the room. The street might be fine. The camera mount has been redesigned. The regular mount is constantly knocked down especially if you fly around the room. The new mount is printed with TPU plastic, it is fixed with a screw and is suitable only for the assembled quadcopter https://www.thingiverse.com/thing:5422385 For another frame that is spare, there need to model another mount. The angle of camera installation for the room is practically not needed, there speed is not so great. But for racing, you can do a camera tilt. The flight controller settings are also not very suitable for flying around the room, because if you hit an obstacle, the quadcopter bounces strongly, loses control, recovers for a long time. I found the settings on the site https://oscarliang.com/flash-betaflight-moblite-6-7/, there, in the comments, MATTI offers settings for Mobline6, gives a link to the Google disk. I partially applied these settings for Moblint7 with them it was very easy to fly around the room, the quadcopter no longer bounces! Rate has a bit of a setup too. Also put lighter batteries at 450 mAh. With 650 mAh batteries, which come in the kit are better suited for the street because of its weight and larger capacity.

Квадрокоптер Moblite7 понравился своей простотой, минимум деталей, хорошими моторами, лёгким весом. Но многое пришлось изменить, но это касается для полётов по комнате. Для улицы возможно будет всё хорошо. Крепление камеры переделал. Штатное крепление постоянно сбивается особенно если летать по комнате. Новое крепление напечатал пластиком TPU, оно фиксируется шурупом и годится только для собранного квадрокоптера https://www.thingiverse.com/thing:5422385 Для другой рамы, что запасная, там нужно моделировать другое крепление. Угол установки камеры для комнаты практически не нужен, там скорость не такая большая. Но для гонок можно и сделать наклон камеры. Настройки полётного контроллера тоже не очень годятся для полёта по комнате, потому что если задеть препятствие, то квадрокоптер сильно отскакивает, теряется управление, долго восстанавливается. Нашёл настройки на сайте https://oscarliang.com/flash-betaflight-moblite-6-7/, там, в комментариях, MATTI предлагает настройки для Mobline6, даёт ссылку на гугл диск. Я частично применил эти настройки для Moblint7 с ними оказалось очень легко летать по комнате, квадрокоптер уже так не отскакивает! Rate тоже немного подстроил под себя. Так же поставил более лёгкие аккумуляторы на 450 mAh. С аккумуляторами 650 mAh, которые идут в комплекте лучше годятся для улицы из-за своей массы и большей ёмкости.

Quadcopter Moblite7 liked its simplicity, minimum details, good motors, light weight. But a lot of things had to be changed, but it applies to flying around the room. The street might be fine. The camera mount has been redesigned. The regular mount is constantly knocked down especially if you fly around the room. The new mount is printed with TPU plastic, it is fixed with a screw and is suitable only for the assembled quadcopter https://www.thingiverse.com/thing:5422385 For another frame that is spare, there need to model another mount. The angle of camera installation for the room is practically not needed, there speed is not so great. But for racing, you can do a camera tilt. The flight controller settings are also not very suitable for flying around the room, because if you hit an obstacle, the quadcopter bounces strongly, loses control, recovers for a long time. I found the settings on the site https://oscarliang.com/flash-betaflight-moblite-6-7/, there, in the comments, MATTI offers settings for Mobline6, gives a link to the Google disk. I partially applied these settings for Moblint7 with them it was very easy to fly around the room, the quadcopter no longer bounces! Rate has a bit of a setup too. Also put lighter batteries at 450 mAh. With 650 mAh batteries, which come in the kit are better suited for the street because of its weight and larger capacity.

Received in about 3 weeks, no tax, well packaged. According to ad. I bound the XJT module in D8 mode without a hitch. Then it's just set up the drone by the betaflight and set up the radio to vc set the flight modes: armed, horizontal and angle. I've already started flying with him in the house, it's really good. The only detail I realized is that one of the rubbers on the shock absorbers that attach the plate to the frame, was on the wrong side, and the head of the screw was leaning on the plate, but I easily fixed that. Oh, and with a little charge I managed to fly about eight minutes with each of the batteries that came in it. Would recommend for anyone who wants to learn FPV and train indoors, I am very pleased with the drone.

Recebi em umas 3 semanas, sem taxar, bem embalado. Conforme anúncio. Fiz o bind com o modulo XJT no modo D8 sem problemas. Depois é só configurar o drone pelo betaflight e configurar o rádio para vc setar os modos de vôo: armado, horizon e angle. Já comecei a voar com ele dentro de casa, é muito bom. O único detalhe que percebi é que uma das borrachas dos amortecedores que prendem a placa ao frame, estava do lado errado, e a cabeça do parafuso estava encostando na placa, mas facilmente corrigi isso. Ah, e com um pouco de carga consegui voar uns 8 minutos com cada uma das baterias que veio nele. Recomendo para quem quer aprender FPV e treinar em ambientes fechados, estou muito satisfeito com o drone.

Received in about 3 weeks, no tax, well packaged. According to ad. I bound the XJT module in D8 mode without a hitch. Then it's just set up the drone by the betaflight and set up the radio to vc set the flight modes: armed, horizontal and angle. I've already started flying with him in the house, it's really good. The only detail I realized is that one of the rubbers on the shock absorbers that attach the plate to the frame, was on the wrong side, and the head of the screw was leaning on the plate, but I easily fixed that. Oh, and with a little charge I managed to fly about eight minutes with each of the batteries that came in it. Would recommend for anyone who wants to learn FPV and train indoors, I am very pleased with the drone.

EXACTLY 10 calendar days from China to St Catharines Ontario!!! Before I ever flew this unit I made some mods. I added a UZ80 canopy AND a small beeper (Nick Burns) I added a zip tie and heat shrink to the antena (Justin Davis) Great little flyer, fast indoors but lots of fun outside, canopy crawling in trees with this little thing is a blast.

EXACTLY 10 calendar days from China to St Catharines Ontario!!! Before I ever flew this unit I made some mods. I added a UZ80 canopy AND a small beeper (Nick Burns) I added a zip tie and heat shrink to the antena (Justin Davis) Great little flyer, fast indoors but lots of fun outside, canopy crawling in trees with this little thing is a blast.

EXACTLY 10 calendar days from China to St Catharines Ontario!!! Before I ever flew this unit I made some mods. I added a UZ80 canopy AND a small beeper (Nick Burns) I added a zip tie and heat shrink to the antena (Justin Davis) Great little flyer, fast indoors but lots of fun outside, canopy crawling in trees with this little thing is a blast.

Very fast shipping! Unfortunately the case was a bit squashed during transport, but luckily moblite has not been damaged. Moblite7 flies very fast and very long. Battery charging is about 20min. However, The battery rack is located in the wrong place (too close to te cables), so constantly pushing the battery in and out of the rack will damage the cable insulation or even break it.

Very fast shipping! Unfortunately the case was a bit squashed during transport, but luckily moblite has not been damaged. Moblite7 flies very fast and very long. Battery charging is about 20min. However, The battery rack is located in the wrong place (too close to te cables), so constantly pushing the battery in and out of the rack will damage the cable insulation or even break it.

Very fast shipping! Unfortunately the case was a bit squashed during transport, but luckily moblite has not been damaged. Moblite7 flies very fast and very long. Battery charging is about 20min. However, The battery rack is located in the wrong place (too close to te cables), so constantly pushing the battery in and out of the rack will damage the cable insulation or even break it.

wow 9min flytime indoor with the 650mah 1s lipo, the moblite7 is noch durable, but very light under 20g and good PID setting to fly indoor or outdoor.

wow 9min flytime indoor with the 650mah 1s lipo, the moblite7 is noch durable, but very light under 20g and good PID setting to fly indoor or outdoor.

wow 9min flytime indoor with the 650mah 1s lipo, the moblite7 is noch durable, but very light under 20g and good PID setting to fly indoor or outdoor.

Delivered 3 days earlier than estimated, packaging was OK nothing special, no issues with the drone. I am a first time fpv pilot, so still struggling to fly properly, will post an update after few weeks.

Delivered 3 days earlier than estimated, packaging was OK nothing special, no issues with the drone. I am a first time fpv pilot, so still struggling to fly properly, will post an update after few weeks.

Delivered 3 days earlier than estimated, packaging was OK nothing special, no issues with the drone. I am a first time fpv pilot, so still struggling to fly properly, will post an update after few weeks.

This model is rated as the "best" overall brushless whoop (flying time, performance, durability). I will mod by adding a canopy and ant lite (I prefer the ant lite). Excellent price (purchased on flash sale from Banggood).. Well packaged, arrived safely and promptly. Thank you, Banggood team!

This model is rated as the "best" overall brushless whoop (flying time, performance, durability). I will mod by adding a canopy and ant lite (I prefer the ant lite). Excellent price (purchased on flash sale from Banggood).. Well packaged, arrived safely and promptly. Thank you, Banggood team!

This model is rated as the "best" overall brushless whoop (flying time, performance, durability). I will mod by adding a canopy and ant lite (I prefer the ant lite). Excellent price (purchased on flash sale from Banggood).. Well packaged, arrived safely and promptly. Thank you, Banggood team!

great little drone, works well. a lot of pepole say that it breaks easily, but ive been flying it for a week, crashing into everything, and it did not break. so i would definetly recommend it! also the canopy it comes whith is crap, so i printed my own. i get about 9 min flight times. great product!

great little drone, works well. a lot of pepole say that it breaks easily, but ive been flying it for a week, crashing into everything, and it did not break. so i would definetly recommend it! also the canopy it comes whith is crap, so i printed my own. i get about 9 min flight times. great product!

great little drone, works well. a lot of pepole say that it breaks easily, but ive been flying it for a week, crashing into everything, and it did not break. so i would definetly recommend it! also the canopy it comes whith is crap, so i printed my own. i get about 9 min flight times. great product!