Všechny zprávy

Q: Does this device measure milliampere?

zeptal se yaggoqs na 2022-02-22 04:55:45

Astrobuf no. this is a signal generator. it produces an ac signal of varying amplitude and frequency.

2023-10-28 09:23:39 Ochotný (0)
Předložit
odpovědi (7)

Q: Do you need to have a sautering iron to make it?

zeptal se sup dude na 2020-03-15 12:58:14

Astrobuf yes. uou will need solder and a soldering iron. I find it helpful at times to have some liquid flux (needle tip dispenser type) to complete these type of kits.

2023-10-15 10:00:46 Ochotný (0)
Předložit
odpovědi (11)

Q: can it be used to solder wires?

zeptal se ysl030505 na 2020-02-23 01:35:14

Astrobuf No. not controllable enough or hot enough

2023-10-15 09:58:41 Ochotný (0)
Předložit
odpovědi (5)

Astrobuf you have to provide your own power source. I have used old laptop power supplies. if you use a 24volt laptop supply you should add a small fan to cool the FET's

2022-12-14 10:39:48 Ochotný (1)
Předložit
odpovědi (6)

Q: can you add a plastic case?

zeptal se yuk2019 na 2019-12-02 03:32:25

Astrobuf I do not believe a specifi box is available, but I think you could first any properly sized box around it. My only cautions are that the FET's get hot. In fact, they recommend you use a cooling fan if you will run at 24 volts, so if you box it, a cooling fan would be a must. you would want to leave the hv coil outside of the box.

2022-11-05 09:34:34 Ochotný (0)
Předložit
odpovědi (3)