BG193217494
můj obsah
Všechny zprávy
Recenze
Komentáře
odpovědi
Otázky

Všechny zprávy

BG193217494 17/06/2022
flies very light on the wing loading. the flying weight in the manual is grossly understated. i am using a 3s 1000 battery and still needed to add 5, 1/4oz weights to balance the aft end of the range
F3P 840mm rozpětí křídel Vector 3D akrobatický EPO RC SADA s pevným křídlem/PNP
US$129.99
0
Doporučení
Komentáře (0)
BG193217494 19/10/2020
is this a trainer: No, here’s why. 1. it does not come with any instructions. Most people buying trainers need something that is almost ready to go, not a box full of parts. It also does not have molded in hinges on the control surfaces. you will have to cut/slot/glue your own CA hinges on. the elevators are split with no hardware or allowance to have a pass though the rudder, it will take a lot of fiddling to get this right. the landing gear is also REALLY tall, like almost impractically tall. I may have to re-bend and shorten it to use larger wheels for grass and have it be reasonable. 2. the design does not lend itself to be self stabilizing. don’t forget back before the days of electronic gyros a trainer had a high dihedral angle to be self stabilizing. this wing is flag. it will never just cruise around, you will always have to fly it and that’s not what a beginner wants. with all this being said, it appears to be a good plane for what you get, it won’t be a throw it together in one night kind of plane. it looks like a bigger version of the MG-800 from last year with a canopy so you don’t have to take the wing off to put the battery in. if it flies descent it will probably end up my ski plane for this winter when the snow shows up.
Děvils King EPO Rozpětí Křídel 1020mm Vstupní Tréninkový Model Elektrický Model Pevné Křídlo RC Letadlo KIT
US$120.99 US$145.19
1
Doporučení
Komentáře (2)
BG193217494 04/06/2020
the plastic parts are 3D printed not molded. the main piece that holds the servos is a horrible design. no 5g servo will fit without significant cutting and hacking. the rest of the plane went together well, there are no instructions. I found some picture instructions for it on another site selling it. the CG is too far aft. By the 30% chord rule the cg should be 2 5/16” from the leading edge which balances perfectly with a 2s 1000 and the recommended motor. I have not flown it yet because I’m waiting for bullet connectors for the speed controller but it passes the glide test and seems light enough it should be a good first plane for my son to fly around
Malý holubi 800mm rozpětí EPP pevné křídlo RC letadlo Kit trenér pro začátečníky
US$43.99 US$52.79
2
Doporučení
Komentáře (1)
BG193217494 04/06/2020
The foam moldings are of a good quality. mine didn’t have both wings and the “interchangeable” hardware. An 11 blade 64mm fan will not fit. The outside of the tube is too big only a EDF with a 66mm od will work. The assembly was straight forward and the setup instructions were clear. the decals are good quality and fit with minimal bubbling. I am excited to try flying it.
Zeta Ultra-Z Blaze 790mm Rozpětí Křídel EPO Létající Křídlo Tlačný Jet Racer RC Letadlo KIT
US$87.99 US$105.59
8
Doporučení
Komentáře (2)
BG193217494 04/12/2019
this is not a first airplane. it has no self stabilizing tendencies (no dihedral to auto level) so you have to fly it all the time. that being said it is a good second or 3rd airplane depending on your prior skill. I am running mine on a 1650kv motor and 30a esc and 1300mah 3s. I don’t see how you could fit anything bigger in. I started with a ep8060 prop and it was too much, it melted the hot glue holding the esc in. I stepped it down to an apc 7x6E which is better but still too much prop for my combo. I have apc 7x4E props on the way which I think will be just right. I couldn’t get the wood flap to stay glued onto the wing so I am using single #64 bands to hold the wing down. I added 2 1x6mm 500mm long carbon strips in the wing. the receiver is in the pocket for the center servo and I didn’t need any servo extensions. I am using 2.25 inch tires and I think it will handle grass ok. it has snowed for the winter so I am on skis now which it handles good. The springs on the skis have a tendency to nose it over but I need the angle. it has great aerobatic potential and I think it will be a favorite little park Flyer. it’s just the right size to keep around. mine was built with rudder from the start. it doesn’t need it in the air but makes ground handling fun. I added some holes for cooling air and a scoop out of lexan scraps it should help with temperatures along with the prop change.
MG-800 MG800 Rozpětí 800 mm EPP Tréninkové zařízení Pro začátečníky RC Letadlo Letadlo KIT
US$66.99 US$80.39
5
Doporučení
Komentáře (0)
2,4G 4CH Mikro Nízké Napětí DSM2 DSMX Kompatibilní Přijímač Vestavěný Štětový ESC
US$26.99 US$39.99

Q: did anyone figure out how to get the servos to work? I got the motor working by bringing the trim all the way down but no luck on the servos, yet.

zeptal se BG193217494 na 2020-10-20 12:47:36

ken53 You have to use low voltage servos.

2020-10-20 02:14:10 Ochotný (0)
Předložit
odpovědi (1)
Děvils King EPO Rozpětí Křídel 1020mm Vstupní Tréninkový Model Elektrický Model Pevné Křídlo RC Letadlo KIT
US$120.99 US$145.19

Q: The model kit was delivered without a manual. Is a manual download available? I would like to know where the center of gravity is.

zeptal se BG222069245 na 2020-10-11 04:18:53

BG193217494 I just got mine, no manual. Center of gravity is between 20-30% of the mean aerodynamic chord. Since this is a square wing at the fuselage and calculate the length. Once you have this number it should be on or real close to the spar.

2020-10-19 09:17:22 Ochotný (4)
Předložit
odpovědi (2)
Zábavný Cub 1100mm Rozpětí EPO Monoplán Tréninkové Letadlo RC Letecká sada pro začátečníka
US$113.99 US$136.79

Q: Are there optional floats available for this plane? Thanks.

zeptal se Grant na 2020-06-28 03:54:05

BG193217494 It looks like the floats from the HZ super cub lp would work but a rear mount would need to be fabricated.

2020-07-02 08:01:13 Ochotný (1)
Předložit
odpovědi (1)
BG193217494 04/06/2020
the speed control didn’t come with any motor leads, which it didn’t say in the description so I had to wait again to finish the project it’s going in while more connectors are in the mail.
HTIRC Řada Hornet 12A 2-4S bezkartáčový regulátor otáček s 5V/1A BEC pro RC modely
US$14.99 US$17.99
0
Doporučení
Komentáře (0)
Heng Long 3810 63CM 2.4G Dlouhodobé Ovládání Závodní RC Loď S Chlazením Vody
US$129.99 US$155.99

Q: is it proportional control?

zeptal se captputt na 2019-07-01 07:16:17

Steve No. Steering has three positions left, center and right. Throttle has 5. Stop, slow forward, slow reverse, fast forward, fast reverse. The water cannon has on and off.

2020-05-27 04:49:53 Ochotný (2)
Předložit
odpovědi (2)
BG193217494 21/11/2019
package was very mangled. no outer packaging just thrown in a plastic bag. luckily nothing inside was damaged.
PZ 2,5g servo analogové plastové zařízení Molex pico 1,25 mm / TJC8 2,54 mm pro RC robotové letadlo s robotickým letadlem Letadlo s pevným křídlem
US$4.42 US$5.36
0
Doporučení
Komentáře (0)
BG193217494 15/11/2019
works as expected. smooth throttle and was just the right size for the profile foamie I put it in.
Hobbywing Skywalker 2-3S 20A bezkartáčový regulátor (ESC) s 5V/2A BEC pro RC modely letadel
US$9.00 US$27.99
0
Doporučení
Komentáře (0)
BG193217494 22/10/2019
I used them in my EPP Yak 55. so far they are holding up well. they have good speed for a 3D plane and plenty of torque
6PCS Racerstar MG90S 9g Mini Kovové Převodové Analogové Servo pro 450 RC Vrtulník RC Auto Loď Robot
US$22.99 US$27.99
0
Doporučení
Komentáře (0)
BG193217494 22/03/2019
this is my first time trying a non sponge tip cleaner. I will see how it goes my iron has to be re-tinned frequently.
1PC Těžká Lutovací Žehlička Čistič Železného Hrotu Ocelové Dráty Lutovací Potřeby
US$6.99 US$11.99
0
Doporučení
Komentáře (0)
BG193217494 04/09/2019
should work well for a nice table top camera stand and when folded up will work as a mini vlog handle.
Mini Stolní Stativ s Držadlem pro Gopro Kameru/Mobilní Telefony/Digitální Kamery
US$7.99 US$9.59
0
Doporučení
Komentáře (0)
BG193217494 04/09/2019
looks like it will work well. it is machined from thick sheet stock. time will tell how it holds up over time.
M2 M3 M5 M6 Šroub Matice Super Klíč Uhelníkový vlákno Rychlé uvolnění nástroj pro RC Drone FPV Racing
US$8.99 US$10.99
0
Doporučení
Komentáře (0)

Jste odborník, můžete pomoci?

Upřímně vás zveme k odběru e-mailu s odpovědí na pozvání!

Pokud se přihlásíte k odběru, pozveme vás e-mailem k zodpovězení otázek, které mají lidé ohledně produktů. Tím, že se přihlásíte k odběru, získáte také "Užitečný odznak "! Odběr můžete kdykoli zrušit na stránce nastavení ochrany osobních údajů.

Pomozte ostatním a buďte šťastnější!

  • předplatit

O odznakech

Odznaky souvisejí s komunitou a uživatelé získávají odznaky vytvářením kvalitního obsahu, dokončováním misí nebo účastí na zvláštních činnostech. Specifičtí lidé budou mít také svůj vlastní exkluzivní odznak.
Odznak generálního ředitele

odznak ceo vlastní pouze šéf náramku.

Odznaky, které můžete vydělat, se brzy objeví
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe