Realacc X210 214мм 3мм/4мм рама из карбонового волокна RC-дрона FPV Racing c Matek PDB-XT60 5V и 12V

Связанные отзывы

• От George1984 10/08/2016 My first impressions: frame looks pretty good, but has several issues. Slots for camera mount needs to be corrected because assembling is not possible without some sandpaper work. Kit is delivered with too short screws. Screws are exceeding 4 mm plate for less than 2 mm, which is not enough. Also too short screws for vtx antenna mount. And worse thing, holes for FC and PDB are not in good position. Standard is 30.5 mm, and drilled on the frame is under 30 mm. Need to be corrected. Feature
• От walterkort 12/08/2016 We all know it's not the original design, the quality of this kit is very nice! And the weight...it's so light!! All the parts that you need are in there and it's ready to assemble. Carbon is a nice mat twill weave. Of course I will sand the edges but they look clean at first glance. Only the extra plate for the lipo is a very rough cut, but who cares... Some tiny holes in the middle of the top plate (where the camera plates will slip in) are a bit to tiny. With some sand paper of file you can make