5string2599 일 전에 썼습니다.Sturdy frame. I used a flytower f3 and it fits perfectly. Runcam swift fits, but you might have difficulty with high FPV angles. Battery mounts to bottom, and so far no issues with that. Flys great with ~5 minutes flight time with BR2205 2300 3S 1300 and flytower f3 stack.
타고 George198410/08/2016My first impressions:
frame looks pretty good, but has several issues. Slots for camera mount needs to be corrected because assembling is not possible without some sandpaper work.
Kit is delivered with too short screws. Screws are exceeding 4 mm plate for less than 2 mm, which is not enough. Also too short screws for vtx antenna mount.
And worse thing, holes for FC and PDB are not in good position. Standard is 30.5 mm, and drilled on the frame is under 30 mm. Need to be corrected.
Feature
타고 walterkort12/08/2016We all know it's not the original design, the quality of this kit is very nice! And the weight...it's so light!! All the parts that you need are in there and it's ready to assemble. Carbon is a nice mat twill weave. Of course I will sand the edges but they look clean at first glance. Only the extra plate for the lipo is a very rough cut, but who cares...
Some tiny holes in the middle of the top plate (where the camera plates will slip in) are a bit to tiny. With some sand paper of file you can make