This RX703A receiver can talk with all DEVO series transmitters. Connecting with DJI NAZA Lite or NAZA V2 Flight Controller. On the receiver, use One servo cable to connect the DATA BUS port on the RX703A and then on the X2 port of the NAZA Flight Controller. This simplify the installation and also helps to keep the vibration down. Then on the NAZA software you choose "PPM" in the RC page, then you control the NAZA Flight Contoller with just one servo cable. Just like the Futaba S.Bus idea.Designed for :Walkera DEVO series transmitter DJI Flight Controllers (e.g. Phantom / NAZA Lite / NAZA V2) and of coarse QR X350 Pro

This RX703A receiver can talk with all DEVO series transmitters. Connecting with DJI NAZA Lite or NAZA V2 Flight Controller. On the receiver, use One servo cable to connect the DATA BUS port on the RX703A and then on the X2 port of the NAZA Flight Controller. This simplify the installation and also helps to keep the vibration down. Then on the NAZA software you choose "PPM" in the RC page, then you control the NAZA Flight Contoller with just one servo cable. Just like the Futaba S.Bus idea.Designed for :Walkera DEVO series transmitter DJI Flight Controllers (e.g. Phantom / NAZA Lite / NAZA V2) and of coarse QR X350 Pro

This RX703A receiver can talk with all DEVO series transmitters. Connecting with DJI NAZA Lite or NAZA V2 Flight Controller. On the receiver, use One servo cable to connect the DATA BUS port on the RX703A and then on the X2 port of the NAZA Flight Controller. This simplify the installation and also helps to keep the vibration down. Then on the NAZA software you choose "PPM" in the RC page, then you control the NAZA Flight Contoller with just one servo cable. Just like the Futaba S.Bus idea.Designed for :Walkera DEVO series transmitter DJI Flight Controllers (e.g. Phantom / NAZA Lite / NAZA V2) and of coarse QR X350 Pro

Just purchased all this Walkera QR X350 Pro Parts to upgrade on my Walkera QR X350 quadcopter, hope after upgraded can have more flight time and better flight performance. I buy from Banggood because here you can get all the parts selling cheaper than other seller with free shipping services and also have good customer service support.

Just purchased all this Walkera QR X350 Pro Parts to upgrade on my Walkera QR X350 quadcopter, hope after upgraded can have more flight time and better flight performance. I buy from Banggood because here you can get all the parts selling cheaper than other seller with free shipping services and also have good customer service support.

Just purchased all this Walkera QR X350 Pro Parts to upgrade on my Walkera QR X350 quadcopter, hope after upgraded can have more flight time and better flight performance. I buy from Banggood because here you can get all the parts selling cheaper than other seller with free shipping services and also have good customer service support.

I use this one with devo 7 in ppm mode and cc3d revo. Works great

I use this one with devo 7 in ppm mode and cc3d revo. Works great

I use this one with devo 7 in ppm mode and cc3d revo. Works great

I bought this just to test if the "Data Bus" could be used as replacement for the RX1002 + a PPM and it seems to work perfect. I am using it in combination with a CC3D and Cleanflght. Although lacking in channels removes a on more part that can go wrong. I wish Walkera could use PPM on all there receivers..

I bought this just to test if the "Data Bus" could be used as replacement for the RX1002 + a PPM and it seems to work perfect. I am using it in combination with a CC3D and Cleanflght. Although lacking in channels removes a on more part that can go wrong. I wish Walkera could use PPM on all there receivers..

I bought this just to test if the "Data Bus" could be used as replacement for the RX1002 + a PPM and it seems to work perfect. I am using it in combination with a CC3D and Cleanflght. Although lacking in channels removes a on more part that can go wrong. I wish Walkera could use PPM on all there receivers..

The receiver works great with CC3D. Moved from PWM to PPM with this RX. The peripherals are included just as shown in the picture. By the way, I am using Devo 7. Recommended !

The receiver works great with CC3D. Moved from PWM to PPM with this RX. The peripherals are included just as shown in the picture. By the way, I am using Devo 7. Recommended !

The receiver works great with CC3D. Moved from PWM to PPM with this RX. The peripherals are included just as shown in the picture. By the way, I am using Devo 7. Recommended !

Over six months ago I bought a QR X350 Pro with the Devo 10 and RX703A, the Devo 10 and RX703A receiver have been flawless in their operation. Having the Data Bus makes setup and installation easy and tidy. Since then I have purchased 2 more receivers for my other quadcopter and airplanes. The range is much further than I can effectively fly even in FPV mode. I would recommend this receiver and Devo 10 transmitter to anyone seeking a high quality setup at a reasonable price.

Over six months ago I bought a QR X350 Pro with the Devo 10 and RX703A, the Devo 10 and RX703A receiver have been flawless in their operation. Having the Data Bus makes setup and installation easy and tidy. Since then I have purchased 2 more receivers for my other quadcopter and airplanes. The range is much further than I can effectively fly even in FPV mode. I would recommend this receiver and Devo 10 transmitter to anyone seeking a high quality setup at a reasonable price.

Over six months ago I bought a QR X350 Pro with the Devo 10 and RX703A, the Devo 10 and RX703A receiver have been flawless in their operation. Having the Data Bus makes setup and installation easy and tidy. Since then I have purchased 2 more receivers for my other quadcopter and airplanes. The range is much further than I can effectively fly even in FPV mode. I would recommend this receiver and Devo 10 transmitter to anyone seeking a high quality setup at a reasonable price.

This is second order, tested working very well on Naza M-Lite and APM filght controller. Failed safe working and cable-less connection, Thank you Banggood offer this good selling price.

This is second order, tested working very well on Naza M-Lite and APM filght controller. Failed safe working and cable-less connection, Thank you Banggood offer this good selling price.

This is second order, tested working very well on Naza M-Lite and APM filght controller. Failed safe working and cable-less connection, Thank you Banggood offer this good selling price.

THE WALKERA RECEIVERS IN GENERAL ARE EXPENSIVE BUT THEY DO HAVE S BUS SO CUT DOWN ON WIRES AND THE SIGNAL IS FASTER AND MORE SECURE WITH GREATER DISTANCE THAN MOST OTHERS, ALSO THE DEVO F7 CAN BE SET UP TO GIVE 6 FLIGHT MODES WHICH IS VERY HANDY.

THE WALKERA RECEIVERS IN GENERAL ARE EXPENSIVE BUT THEY DO HAVE S BUS SO CUT DOWN ON WIRES AND THE SIGNAL IS FASTER AND MORE SECURE WITH GREATER DISTANCE THAN MOST OTHERS, ALSO THE DEVO F7 CAN BE SET UP TO GIVE 6 FLIGHT MODES WHICH IS VERY HANDY.

THE WALKERA RECEIVERS IN GENERAL ARE EXPENSIVE BUT THEY DO HAVE S BUS SO CUT DOWN ON WIRES AND THE SIGNAL IS FASTER AND MORE SECURE WITH GREATER DISTANCE THAN MOST OTHERS, ALSO THE DEVO F7 CAN BE SET UP TO GIVE 6 FLIGHT MODES WHICH IS VERY HANDY.

THIS IS MY 6TH ONE OF THESE THEY ARE PERFECT FOR USING YOUR WALKERA TX ON ANY QUAD MODEL YOU HAVE AND ONLY NEED THE ONE PPM WIRE TO THE FLIGHT CONTROLLER AS THEY ARE S BUS AND ALL SIGNALS ARE SENT THROUGH THE ONE CABLE , ITA A MUST FOR ALL FLYERS AND ALL MY MODELS ARE FITTED WITH THESE , REALLY GOOD VALUE FOR MONEY THANK YOU.

THIS IS MY 6TH ONE OF THESE THEY ARE PERFECT FOR USING YOUR WALKERA TX ON ANY QUAD MODEL YOU HAVE AND ONLY NEED THE ONE PPM WIRE TO THE FLIGHT CONTROLLER AS THEY ARE S BUS AND ALL SIGNALS ARE SENT THROUGH THE ONE CABLE , ITA A MUST FOR ALL FLYERS AND ALL MY MODELS ARE FITTED WITH THESE , REALLY GOOD VALUE FOR MONEY THANK YOU.

THIS IS MY 6TH ONE OF THESE THEY ARE PERFECT FOR USING YOUR WALKERA TX ON ANY QUAD MODEL YOU HAVE AND ONLY NEED THE ONE PPM WIRE TO THE FLIGHT CONTROLLER AS THEY ARE S BUS AND ALL SIGNALS ARE SENT THROUGH THE ONE CABLE , ITA A MUST FOR ALL FLYERS AND ALL MY MODELS ARE FITTED WITH THESE , REALLY GOOD VALUE FOR MONEY THANK YOU.

ARRIVED FAIRLY FAST TO UK FROM CHINA, REALISTICALLY RATHER A TAD EXPENSIVE IN COMPARISON TO OTHER CHINESE SITES BUT I WANTED IT FAST SO PAID THE EXTRA COUPLE OF POUNDS, I LIKE THIS PARTICULAR RX AS I CAN USE IT WITH MY DEVO F7 OR DEVO 7 TO FLY WITH JUST ONE SERVO LEAD,THANKS

ARRIVED FAIRLY FAST TO UK FROM CHINA, REALISTICALLY RATHER A TAD EXPENSIVE IN COMPARISON TO OTHER CHINESE SITES BUT I WANTED IT FAST SO PAID THE EXTRA COUPLE OF POUNDS, I LIKE THIS PARTICULAR RX AS I CAN USE IT WITH MY DEVO F7 OR DEVO 7 TO FLY WITH JUST ONE SERVO LEAD,THANKS

ARRIVED FAIRLY FAST TO UK FROM CHINA, REALISTICALLY RATHER A TAD EXPENSIVE IN COMPARISON TO OTHER CHINESE SITES BUT I WANTED IT FAST SO PAID THE EXTRA COUPLE OF POUNDS, I LIKE THIS PARTICULAR RX AS I CAN USE IT WITH MY DEVO F7 OR DEVO 7 TO FLY WITH JUST ONE SERVO LEAD,THANKS