tin nhắn

Krotow 2018-10-22 20:37:43
Ordered this hot air soldering gun for my DIY board SMD component soldering and RC hobby module repairs. Was not mistaken - it works. External compressor allow to blow much larger air volume against lesser hot air guns with fan in handle. This extra air allow to remove and and solder in larger components too very easy. Air blowing at slower speed prevent blowing away components around soldering spot and melt wires and capacitor insulation nearby. Tried to solder anything in and out: SMD resistors and capacitors - check. Inductances - check. Diodes and transistors - check. SMD LDOs like LM78D15... and large FETs - check. SOP, QFN, QFP and LQFP ICs - check. Didn't tried BGAs yet by seen that they are reachable with this gun too. But use good flux like RMA-218 for SMD component soldering. Compatibility: Soldering paste - check. Regular solder - check. ROHS - check. Heat tube shrinking - check (temp no more than 150 degrees. To RC hobbyists - this gun appeared very nice in XT60 connector soldering even for thick 12AVG wires and to solder 12AWG wires to board. Was easier than with soldering iron. Extras: Have 4 replaceable nozzles. When handle is put back into the holder, device automatically cool down and goes into standby and back to working mode when handle is not in holder. Compressor is not loud on speed under 5 (for me it mean always :) Seems very good budget product, especially for this price. Had a little surprise when received this soldering gun with Australian mains plug and adapter for EU mains socket. It works from our 220V/50Hz without problems. Because ground connection in adapter is missing (it have ground contacts for socket and plug, but they are internally disconnected), I will replace plug to EU plug later.
4
gợi ý
Bình luận (0)

Những người đánh giá hàng đầu bạn có thể thích:

Krotow 2018-08-16 20:46:41
1
gợi ý
Bình luận (0)

Những người đánh giá hàng đầu bạn có thể thích:

Q: Where can I find the requested Antennas and the optical dioptrin adapters???

Được hỏi bởi RcBachelor trên 2017-12-01 07:02:08

Krotow On purchase keep in mind that EV200D have RP-SMA connectors. Antennas with SMA connectors can be attached only via SMA to RP-SMA adapters.

2019-03-24 08:00:37 Hữu ích (0)
Gửi đi
Đáp án (4)

Krotow It is a great universal battery. Plug white balance connector into QX7 transmitter or black Jack connector plug into googles (Fatshart, Aomway, Skyzone, Eachine, etc.).

Mar Lin 2018-09-17 03:29:32
3
Bình luận (3)

Q: Is there a way to disable to beeping?

Được hỏi bởi NickH trên 2018-07-21 04:51:23

Krotow If beeping annoy your family in night, glue buzzer hole shut with a piece isolation tape. It will bebome quiet but still audible.

2018-11-02 10:44:36 Hữu ích (0)
Gửi đi
Đáp án (2)
Krotow 2018-10-16 18:48:47
0
gợi ý
Bình luận (0)

Những người đánh giá hàng đầu bạn có thể thích: