tin nhắn

Q: What is the function of pushbutton S1?

Được hỏi bởi spaco trên 2019-08-30 04:16:07

Roger The pushbutton is the main ON / OFF switch. It cuts the input (jack plug) from the 3 outputs.

2019-08-31 02:08:15 Hữu ích (0)
Gửi đi
Đáp án (1)

Q: Do you also have Cool White?

Được hỏi bởi kam1787 trên 2019-08-28 08:54:22

Roger https://www.banggood.com/High-Power-3W-LED-DIY-Light-Bead-Lamp-Chip-Blue-Red-Green-Warm-White-Yellow-p-1024180.html?rmmds=search

2019-08-30 01:56:28 Hữu ích (0)
Gửi đi
Đáp án (2)

Roger Youmay use to receivers of 4 channels with only one remote (if you paire them), but on each receiver the first channel will be ON when you push button 1 of the remote, and so on. It has not much sense.

2019-08-15 02:57:58 Hữu ích (0)
Gửi đi
Đáp án (1)

Q: Vt means what

Được hỏi bởi kalaiselvanmani trên 2019-08-14 01:32:53

Roger TheVT pin is the validation pin, to make sure the received signal is coming from the paired remote. You can just wire it to high.

2019-08-15 02:55:50 Hữu ích (0)
Gửi đi
Đáp án (1)

Q: The Whiter From the rgb is neutral/normal one?

Được hỏi bởi gabriel_wender trên 2019-08-13 10:49:18

Roger Youhave the choice between RGB, or Warm white, or neutral white (less yellowish than the warm white). This are 3 different strips.

2019-08-15 02:52:28 Hữu ích (0)
Gửi đi
Đáp án (1)

Roger That'snot normal. 3 possibilities : First, your module is effective. Second, you need to pair the remotes from new. Third, a neighbour is using something with same frequency (may baby survey tool)

2019-08-05 05:08:14 Hữu ích (0)
Gửi đi
Đáp án (1)

Q: Is it suitablefor windows7?

Được hỏi bởi om meena trên 2019-07-15 11:27:11

Roger Theoperating system doesn't influence.

2019-07-24 04:43:27 Hữu ích (0)
Gửi đi
Đáp án (1)

Roger onceyou don't use it in the way the manufacturer build it, it's at your own risks. You have to see how the segments are powered.

2019-07-24 04:42:29 Hữu ích (0)
Gửi đi
Đáp án (1)

Q: Will it work with 9v?

Được hỏi bởi omerss trên 2019-07-23 12:21:03

Roger Yes,but it will not be bright enough, because the small resistors are calculated for 12V

2019-07-24 04:39:49 Hữu ích (0)
Gửi đi
Đáp án (1)