Phản hồi khách hàng

4.93 trong số5
Viết bình luận
  • Tất cả đánh giá(14)
  • Hình ảnh(2)
  • Video(0)
  • Tất cả các ngôi sao
    • Tất cả các ngôi sao(14)
    • 5 sao(13)
    • 4 sao(1)
    • 3 sao(0)
    • 2 sao(0)
    • 1 sao(0)
Sắp xếp theo:
Để xem trước
  • Để xem trước
  • Hữu ích nhất
  • Gần đây nhất
Chỉ đánh giá từ quốc gia của bạn (United States)
  • October-07 2020 08:39:59

    15w é a potencia de consumo, a potencia optica é 3.5w. mas o produto funciona perfeitamente.

    Bình luận (1)
  • December-14 2020 11:19:11

    Arrived safely but will be several weeks before I can test it out

    Bình luận
  • October-06 2020 10:53:43

    Works better than I expected, burnt through 3mm plywood no problem. The button switch seems a bit of a mystery, the laser is on till you press the momentary contact, so you have to hold it to keep the laser off. So I removed the white wire, and replaced it with the PWM wire from my controller, and it now performs as I expected. If it has a fair life span, I would buy another when it eventually gives up.

    Bình luận (2)
  • January-12 2021 04:06:43

    very happy with this unit , it's 4.5w power , 15w is the electrical draw, it comes with no instructions , I have fitted to an uno cnc shield , use the supplied power adaptor , I did not use module ,I cut the jack plug off wired to the red and black wires from the laser, I wired the white wire to the power management + pin from the uno and connected the - pin from the uno power management to the black wire of the power adaptor. works great and fan runs all the time

    Bình luận
  • December-22 2020 11:37:48

    The laser module arrived within 2 weeks of ordering from China so thumbs up to Banggood. There are no instructions on how to interface to a CNC controller and the supplied psu/interface board keeps the laser switched on full power unless you keep the button pressed which seems a bit crazy. A 3A 12v power plug supply is included but has two adaptors in order to plug into a UK socket which is not impressive or possibly unsafe. Although sold as a Vigotec module, the wiring connectors were not compatible

    Bình luận
  • January-02 2021 16:50:34

    llego en la fecha indicada. viene en una caja de carton, sin ninguna proteccion interna, en la caja tal cual. funcionamiento perfecto, al menos de momento. he cortado contrachapado de 3,6mm en 4 pasadas sin problema (250 mm/m 95% potencia) espero que siga asi muco tiempo. recomendable.

    Bình luận
  • January-23 2021 17:06:29


    Bình luận
  • January-15 2021 08:42:29


    Bình luận
  • December-16 2020 11:45:02

    Excelent product, great power,

    Bình luận
  • December-02 2020 02:12:33

    Thanks I received my package.... Just a putty no diagram to connect to machine.

    Bình luận

    Total 0 pages

    Go to page


    Bạn có thể quan tâm

    recommendation for you
    • US$349.99
    • US$14.99
    • US$83.99
    • US$24.99
    • US$140.99
    • US$38.99
    • US$119.99
    • US$6.99
    • US$13.99
    • US$8.99
    • US$45.99
    • US$129.90
    • US$4.99
    • US$45.99
    • US$45.99
    • US$134.99
    • US$4.99
    • US$24.22