Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (124) İnceleme
  • (26) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(124)
    • 5 Yıldız(119)
    • 4 Yıldız(3)
    • 3 Yıldız(2)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (United States)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 05/06/2018

    The electronic thermostat is just perfect for my DIY projects. Finally built an incubator. :-)

    Yorumlar
    Orjinali göster
  • 19/04/2017

    Tökéletesen meg felelt a leírásnak!

    Yorumlar
    Orjinali göster
  • 10/10/2020

    Llego rapido! A falta de probarlo tiene todo lo incluido para el montaje. Gracias Bangkok!!!

    Yorumlar
    Orjinali göster
  • 21/09/2018

    bom custo beneficio e até chegou rapido

    Yorumlar
    Orjinali göster
  • 10/03/2018

    The housing does not fit together easily. In order to save slightly longer screws, the bottom plate is too close to the PCB, so that the protruding wires of the parts ensure that the bottom plate is bent. An annoying fact is that it has not been thought that you have to screw the module. If the bottom plate had been made two centimeters wider and had two extra holes, this problem was solved. Of course we were curious how the accuracy of such an extremely cheap device looks like. We compared the reading of the NTC sensor with that of a type-K thermocouple coupled with a precise Lascar thermometer. The average error is ± 1.43 ° C and that is good enough for a thermostat. At around room temperature (+20 ° C) the error was the smallest but the deviation increases, both to lower and higher temperatures. At a reference temperature of -5 ° C the W1209 indicated a temperature of -7.2 ° C. At a reference temperature of +100 ° C the module claimed that it was +102 ° C. Read the full test: http://verstraten-elektronica.blogspot.nl/p/w1209-temperatuur-controller.html

    Yorumlar
    Orjinali göster
  • 04/07/2017

    I purchased this kit with no real use in mind. Bottom line is, I am retired and simply put kits together to keep the 'little grey cells' active. But having said that this is a great kit to build. It comes with a sensor probe on a twin flex that is about 500mm long. The temperature settings are displayed on a display of 3 x 7 segment LED's. Input requirement is 12 volts and this is switched by a onboard relay rated at 20A @ 14 volts. Temperature settings and adjustments are set/made using 3 PCB switches. And the bonus - the whole assembly is housed in a clear Perspex case measuring a very tiny 58 x 50 x 15 mm. Uses are limited only by your imagination.

    Yorumlar
    Orjinali göster
  • 05/05/2021

    This little temp relay works very good. Im honestly satisfied with your product. Thank you Bangood for a great produck.

    Yorumlar
    Orjinali göster
  • 06/04/2021

    It works so great on my inverter and the additional fan system I designed keep my inverter original fan off at all times. Great product I ordered more after this test.. 😀

    Yorumlar
    Orjinali göster
  • 16/06/2019

    المنتج وصل في وقت جصير وليس تالف

    Yorumlar
    Orjinali göster
  • 14/06/2019

    Good Banggood.

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • US$62.99
    • US$12.99
    • US$39.99
    • US$16.71
    • US$37.99
    • US$57.59
    • US$25.99
    • US$19.99
    • US$2.99
    • US$19.99
    • US$15.99
    • US$7.99
    • US$2.99
    • US$6.99
    • US$6.99
    • US$5.99
    • US$1.99
    • US$2.99